Roland M-16DX User Manual download pdf (Page 2)

DAW controller function

You can connect the M-16DX to your PC and use it to control DAW software.

Simultaneously press the CURSOR [BWD] and [FWD] buttons.

The Utility screen will appear.

Use the CURSOR [FWD] button to choose “DAW Select.”

Use the VALUE [-]/[+] buttons to select the

DAW software you’re using.

Choose “SONAR” if you’re using SONAR, or

choose “GENERAL” if you’re using Logic/Live.

Use the CURSOR [BWD] button to select “DAW Controller.”

With the factory settings, this will be “OFF.”

Use the VALUE [+]/[-] buttons to choose

“ALT” (ALTERNATIVE mode) or “EXC”

(EXCLUSIVE mode).

Now you can control the parameters of your

DAW software from the M-16DX.

ALTERNATIVE mode

This setting is best when you want to operate the mixer and your DAW software

simultaneously. To use ALTERNATIVE mode, choose the

ALT

setting.

EXCLUSIVE mode

This setting is suitable for mastering after you’ve finished recording. You can use this

with SONAR and in Logic. In this mode, you’re limited to controlling either the mixer or

your DAW software, but you’ll be able to use all of the M-16DX’s knobs to control large

numbers of parameters simultaneously. To use EXCLUSIVE mode, choose

EXC

* For details on operation in each mode, refer to “How the M-16DX modes work in each DAW” (p.

4).

Selecting the DAW controller mode

M-16DX_v2_e.book 2 ページ２００７年１１月９日　金曜日　午前１０時５３分

1 2 3 4 5 6 7 ... 22 23

No comments

Roland M-16DX User Manual Page 2