Roland FA-66 User's Guide download pdf (Page 16)

SONAR REAC Recording System User’s Guide

•

S-1608 System

Figure 5. S-1608 System Diagram

The preceding S-1608 system consists of an S-1608 (16 inputs and 8 outputs) and an S-0816 (8 inputs and

16 outputs). To record 16 inputs from the S-1608 and 8 inputs from the S-0816 into SONAR, use the REAC

MODE switch located on the front panel of each device and configure the S-1608 as the MASTER and the

S-0816 as the SLAVE.

The QUAD-CAPTURE / OCTA-CAPTURE / FA-66 / VS-700R is used for monitoring during recording.

Digital Audio Clock Synchronization is necessary to avoid monitoring problems, such as noises and gaps. To

synchronize the monitoring device with the REAC system when using the FA-66, simply connect the digital

output of the S-0816 to the digital input of the FA-66 with an optical cable. When using the QUAD-CAPTURE

/ OCTA-CAPTURE / VS-700R, connect the digital output of the S-0816 to the digital input of the QUAD-

CAPTURE / OCTA-CAPTURE / VS-700R using an Optical to COAXIAL converter with an Optical cable and a

coaxial cable. If using the VS-700R, open VS-700R IO Editor and choose DIGITAL 1 in SYNC SOURCE and

COAXIAL in DIGITAL 1 INPUT.

Stage

FOH

S-0816

(SLAVE)

S-1608

(MASTER)

SPLIT/BACKUP

DIGITAL OUT

DIGITAL IN

IEEE1394/USB2.0

Headphones

LAN

port

Network cable

(Cat. 5e)

Digital audio clock

Computer

SONAR

REAC driver

Audio interface driver

Audio Interface

(96 kHz)

S-4000D

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 44 45

No comments

Roland FA-66 User's Guide Page 16