Renaming and Copying Performances
5
New Function Changing the Key (Transpose)
Adjusting the Volume
1.
Briey press and release both the [LWR] and [UP2] buttons
to call up the “Parts Mixer” page.
The “Volume” value of the last part you selected (on the main page)
is already highlighted.
2. Rotate the [CURSOR/VALUE] dial to set the desired volume
for that part (0~127).
3. Press the [UP2] button to select the “UP2 Volume” value.
If you press the [UP2] button again you can select the “UP1 Volume”
value.
4. Repeat step (2) above to adjust the Upper 2 volume.
5. Press the [LWR] button to select the “LWR Volume” value.
6. Repeat step (2) above to adjust the Lower volume.
Adjusting the Reverb, Chorus and Panpot
7.
Press the [ENTER/SELECT] button and rotate the [CURSOR/
VALUE] dial to select the “Reverb”, “Chorus” or “Panpot” of
the real-time part that you want to change.
8. Press the [ENTER/SELECT] button to conrm the selection.
In the above example we selected the “Reverb” parameter of the
Upper 1 part (UP1).
9. Rotate the [CURSOR/VALUE] dial to set the desired value.
10. For adjust other values repeat actions from step (7).
Leaving the Part Mixer page
11.
Press the [EXIT] button to return to the main page.
New Function Changing the Key
(Transpose)
This new function allows you to reset the transpose quickly.
1. While the “KEY” page is displayed:
2. Press the [KEY] button to set the transpose to “0”.
The Key transpose value is restored to “0”
For more details see “Changing the key” in the BK-5 owner’s manual.
Comments to this Manuals