Roland M-1000 User Manual

R-1000 Remote Control ReferenceThe R-1000 supports remote control from the V-Mixer. This document describes connections, settings and the operations o

10Remote Controlling REC/PLAYAbout Function ButtonsThe REC/PLAY buttons are assigned to the function buttons (F1-F8) of the V-Mixer. fig.function-butt

11Remote Controlling REC/PLAYRemote Control the R-1000 Using the V-Mixer ButtonsCheck [Use RECORDER sect buttons] in PREFERENCE to use the buttons in

12Remote Controlling the Track Status SetupYou can remote control the track status from the R-1000 SETUP popup.1. Call up the R-1000 CONTROL popupRefe

13Remote Controlling the Track Status Setupfig.setup-popup.eps1. Track name displayYou can add names to tracks. Move cursor and press [ENTER] to open

14Remote Controlling the Patchbay Setup 1. Call up the R-1000 CONTROL popupUsing the steps described in “Call up the R-1000 CONTROL popup” (p. 7), cal

15Remote Controlling the Patchbay Setupfig.patchbay-popup.epsYou can use [F1] and [F2] function buttons to switch between INPUT (recording) patchbay a

16Remote Controlling the Patchbay SetupAbout Function Buttonsfig.function-button.epsF1 INPUT (REC)This switches to INPUT patchbay for recording.F2 OUT

17Remote Controlling the Song Setup1. Call up the R-1000 SETUP popupUsing the steps described in “Call up the R-1000 SETUP popup” (p. 12), call up the

18Remote Controlling the Song Setupfig.song-popup.eps1. Project informationThis shows the name, created date/time, sampling frequency and file size of

19Remote Controlling the Song SetupSwitching the song1. Select a song to loadSelect a song on the song list using cursor and press [F1] function butto

2Connection and SetupThe following versions of the V-Mixer series are compatible with the R-1000 remote control. If the software version of your V-Mix

20Remote Controlling the Song SetupEditing the song name1. Select a song to edit nameSelect a song on the song list using the cursor.2. Load the songP

21Remote Controlling the Song SetupDeleting the song1. Select a song to deleteSelect a song on the song list using the cursor.2. Delete the songPress

22Remote Controlling the Song Setup1. Call up the R-1000 CONTROL popupUsing the steps described in “Call up the R-1000 CONTROL popup” (p. 7), call up

23Remote Controlling the Song Setupfig.marker-popup.eps1. Device and Time displayThis shows same contents as PATCHBAY popup and CONTROL popup.2. Marke

24Remote Controlling the Song SetupEditing the marker name1. Select a marker to edit the nameSelect [NAME] part of a marker on the marker list using t

25Other FunctionsCheck all the R-1000 units connected to the V-MixerCall up the R-1000 CONTROL popup and press [F7] function button to select [ALL VIE

26Other Functions• A-B REPEATWhen A/B repeat is off, the first pressing of this button sets the A mark and causes the button to flash. When pressed ag

3Connection and SetupYou can connect the R-1000 to the REAC A port of your V-Mixer as below.fig.connect-A-port.epsV-Mixer SetupMenu Parameter Value• R

4Connection and Setup You can connect the R-1000 to the REAC B port of your V-Mixer as below.fig.connect-B-port.epsV-Mixer SetupMenu Parameter Value•

5Connection and Setup You can connect the R-1000 to the SPLIT/BACKUP port of your V-Mixer as below.This connection is possible with M-480, M-400 or M-

6Connection and SetupV-Mixer SetupMenu Parameter Value• REAC CONFIG REAC SETUP FOH• MIDI RECEIVE Sys Ex ONSEND Sys Ex ONMIDI OUT/THRU OUT* Sele

7Remote Controlling REC/PLAYTo call up the R-1000 CONTROL popup hold down [SHIFT] button and press [DISP] button in the USB MEMORY RECORDER section. F

8Remote Controlling REC/PLAYfig.R-1000control-popup.eps1. SETUP buttonCalls up track status setup screen (p. 12).2. Connection portThis shows the REAC

9Remote Controlling REC/PLAYAbout REC/PLAY control buttons.fig.transport.eps1. |<<This makes the current position jump to the beginning of the c