Roland TD-12K Owner's Manual Page 1

Thank you, and congratulations on your choice of the TD-12K Roland Drum System. * Kick Pedal and Hi-Hat stand are not included. 202 Copyright © 2005

10 IMPORTANT NOTES When adjusting, use the tuning key supplied with the VH-11. • On the PD-85, adjusting the head tension affects only the head respo

11 IMPORTANT NOTES fig.PD-85-Set.e When attaching the PD-85 to the mount, be sure to tighten the stand fixing screw securely. If it remains loose, th

12 IMPORTANT NOTES1. Remove the wing nut, felt, collar, and washer included with the cymbal mount. 2. Use the tuning key supplied with the VH-11 to t

13 IMPORTANT NOTES Using the built-in connection cables of the MDS-12, connect the pads, cymbals, hi-hat, and kick trigger pad. To prevent malfunctio

14 IMPORTANT NOTES To play the sound assigned to the head, hit only the head.To play a rim shot, you must strike both the head and the rim of the pa

15 IMPORTANT NOTES Choking Choking (pinching) the cymbal’s edge with the hand immediately after hitting the cymbal makes the sound stop. Choke the lo

03901767 07-01-3N As of November 1, 2006 (ROLAND)Information When you need repair service, call your nearest Roland Service Center or auth

2 USING THE UNIT SAFELY 001 • Before using this unit, make sure to read the instructions below, and the Owner’s Manual...

3 This product complies with the requirements of European Directive 89/336/EEC.For EU Countries 104 • Try to prevent cords and cables from becoming

4 IMPORTANT NOTES 291a In addition to the items listed under “USING THE UNIT SAFELY” on pages 2–3, please read and observe the following: Placement 3

5 IMPORTANT NOTES ❑ TD-12 (Percussion Sound Module) x 1 ❑ VH-11 (V-Hi-Hat) x 1 ❑ KD-85 (V-Kick Trigger Pad) x 1 ❑ PD-105 (V-Pad) x 1 ❑ PD-85 (V-Pad)

6 IMPORTANT NOTES When adjusting, use the tuning key supplied with the VH-11. • On the KD-85, adjusting the head tension affects only the head respon

7 IMPORTANT NOTES Take care not to pinch your fingers between the KD-85 pad and the stand plate. 1. Place the KD-85 pad, with the head surface facing

8 IMPORTANT NOTES13. Adjust the striking point for the beater. The beater’s striking point is adjusted to fall at the center of the head.Adjust the s

9 IMPORTANT NOTES When adjusting, use the tuning key supplied with the VH-11. • On the PD-105, adjusting the head tension affects only the head respo