Roland KR-107 Owner's Manual download pdf (Page 7)

560

• Do not apply undue force to the music rest while it is in use.

561

• Use only the specified expression pedal (EV-7/5; sold separately).

By connecting any other expression pedals, you risk causing

malfunction and/or damage to the unit.

562

• Use a cable from Roland to make the connection. If using some

other make of connection cable, please note the following precau-

tions.

• Some connection cables contain resistors. Do not use cables

that incorporate resistors for connecting to this unit. The use

of such cables can cause the sound level to be extremely low,

or impossible to hear. For information on cable specifications,

contact the manufacturer of the cable.

565

• Before opening or closing the keyboard lid, always make sure

that no pets or other small animals are located on top of the

instrument (in particular, they should be kept away from the

keyboard and its lid). Otherwise, due to the structural design of

this instrument, small pets or other animals could end up getting

trapped inside it. If such a situation is encountered, you must

immediately switch off the power and disconnect the power cord

from the outlet. You should then consult with the retailer from

whom the instrument was purchased, or contact the nearest

Roland Service Center.

Handling Floppy Disks

(Using Optional Floppy Disk Drive)

651

• Floppy disks contain a plastic disk with a thin coating of

magnetic storage medium. Microscopic precision is required to

enable storage of large amounts of data on such a small surface

area. To preserve their integrity, please observe the following

when handling floppy disks:

• Never touch the magnetic medium inside the disk.

• Do not use or store floppy disks in dirty or dusty areas.

• Do not subject floppy disks to temperature extremes (e.g.,

direct sunlight in an enclosed vehicle). Recommended

temperature range: 10 to 50˚C (50 to 122˚F).

• Do not expose floppy disks to strong magnetic fields, such as

those generated by loudspeakers.

652

• Floppy disks have a “write protect” tab which can protect the

disk from accidental erasure. It is recommended that the tab be

kept in the PROTECT position, and moved to the WRITE position

only when you wish to write new data onto the disk.

fig.DiskProtect.e

653

• The identification label should be firmly affixed to the disk.

Should the label come loose while the disk is in the drive, it may

be difficult to remove the disk.

654

• Store all disks in a safe place to avoid damaging them, and to

protect them from dust, dirt, and other hazards. By using a dirty

or dust-ridden disk, you risk damaging the disk, as well as

causing the disk drive to malfunction.

655

• Disks containing performance data for this unit should always be

locked (have their write protect tab slid to the “Protect” position)

before you insert them into the drive on some other unit (except

the PR-300, or a product in the HP-G, HPi, MT, KR, or Atelier

families), or into a computer’s drive. Otherwise (if the write

protect tab remains in the “Write” position), when you perform

any disk operations using the other device’s disk drive (such as

checking the contents of the disk, or loading data), you risk

rendering the disk unreadable by this unit’s disk drive.

Handling CD-ROMs

801

• Avoid touching or scratching the shiny underside (encoded

surface) of the disc. Damaged or dirty CD-ROM discs may not be

read properly. Keep your discs clean using a commercially

available CD cleaner.

Before Using External

Memory

Using External Memory

705

• Never touch the terminals of the External memory. Also,

avoid getting the terminals dirty.

708

• External memories are constructed using precision

components; handle the cards carefully, paying particular

note to the following.

• To prevent damage to the cards from static electricity,

be sure to discharge any static electricity from your

own body before handling the cards.

• Do not touch or allow metal to come into contact with

the contact portion of the cards.

• Do not bend, drop, or subject cards to strong shock or

vibration.

• Do not keep cards in direct sunlight, in closed vehicles,

or other such locations (storage temperature: 0 to 50˚

C).

• Do not allow cards to become wet.

• Do not disassemble or modify the cards.

704 (revise)

• When connecting external memory, make sure to press it

until it is fully inserted.

• Insert the external memory in the External Memory port

evenly and without undue force. Forcing the external

memory may damage the External Memory port.

• Do not insert any object other than the external memory

(e.g., wires, coins, other types of disks, etc.) in the External

Memory port. This may damage the External Memory

port.

• Do not subject the External Memory port cover or

connected External memory to excessive stress.

• Close the external memory cover when using the External

memory for extended periods

203

* GS ( ) is a registered trademark of Roland Corpo-

ration.

* XG lite ( ) is a registered trademark of Yamaha Corpo-

ration.

207

* Apple and Macintosh are registered trademarks of Apple

Computer, Inc.

220

* All product names mentioned in this document are trade-

marks or registered trademarks of their respective owners.

Rear side of the disk

Write

(can write new data onto disk)

Protect

(prevents writing to disk)

Write Protect Tab

KR107_e.book 7 ページ２００５年８月３日　水曜日　午前９時３６分

1 2 3 4 5 6 7 8 9 10 11 12 ... 195 196

Comments to this Manuals

No comments

Roland KR-107 Owner's Manual Page 7

Comments to this Manuals

Related products and manuals for Musical Equipment Roland KR-107