Roland RD-700GX User Manual

Digital PianoModel: RD-700GXDate: Feb. 1, 2008Version: 1.00 1 MIDI Implementation 1. Receive data Channel Voice Messages ● Note off Status2nd byte 3

10MIDI Implementation* System V-Link+------------------------------------------------------------------------------+| Offset |

11MIDI Implementation* SETUP Rhythm/Arpeggio+------------------------------------------------------------------------------+| Offset |

12MIDI Implementation| 00 1F | 0aaa aaaa | Transmit Coarse Tune (16 - 112) || | |

13MIDI Implementation Decimal and Hexadecimal Table (An “H” is appended to the end of numbers in hexadecimal notation.)In MIDI documentation, data val

14MIDI Implementation Example of an Exclusive Message and Calculating aChecksumRoland Exclusive messages (RQ1, DT1) are transmitted with a checksum a

2MIDI Implementation ❍ Resonance (Controller number 71) Status2nd byte 3rd byteBnH 47H vvHn = MIDI channel number: 0H - FH (ch.1 - 16)vv= Resonance v

3MIDI Implementation ● Pitch Bend Change Status2nd byte 3rd byteEnH llH mmHn = MIDI channel number: 0H - FH (ch.1 - 16)mm, ll = Pitch Bend value: 00

4MIDI Implementation ❍ GM2 System On StatusData byte StatusF0H 7EH 7FH 09H 03H F7HByte ExplanationF0H Exclusive status7EH ID number (Universal Non-re

5MIDI Implementation ❍ Channel Pressure StatusData byte StatusF0H 7FH, 7FH, 09H, 01H, 0nH, ppH, rrH F7HByteExplanationF0H Exclusive status7FH ID numb

6MIDI Implementation ❍ Data set 1 DT1 This is the message that actually performs data transmission, and is used when you wish totransmit the data.Sta

7MIDI Implementation ❍ Panpot (Controller number 10) Status2nd byte 3rd byteBnH 0AH vvHn = MIDI channel number: 0H - FH (ch.1 - 16)vv = Panpot: 00H -

8MIDI Implementation Channel Mode Messages ● MONO (Controller number 126) Status2nd byte 3rd byteBnH 7EH 01Hn = MIDI channel number: 0H - FH (ch.1

9MIDI Implementation3. Parameter Address Map * Transmission of “#” marked address is divided to some packets. For example, ABH inhexadecimal notation