Roland fm/am radio User Manual download pdf (Page 29)

29

MFX 06: FLANGER MFX 07: DELAY

Parameter

Value Description

Pre Delay

0.0–100 ms

Adjusts the delay time from the direct

sound until the flanger sound is heard.

Sync OFF, ON

When this is set to ON, the effect is

synchronized with the tempo.

See

“About Note”

(p. 36).

Rate

0.05–

10.00 Hz,

note

Frequency of modulation

Depth 0–127 Depth of modulation

Phase 0–180 deg Spatial spread of the sound

Feedback -98–+98 %

Adjusts the proportion of the flanger

sound that is fed back into the effect.

Negative (-) settings will invert the phase.

Low Gain -15–+15 dB Gain of the low range

High Gain -15–+15 dB Gain of the high range

Balance

D100:0W–

D0:100W

Volume balance between the direct sound

(D) and the flanger sound (W)

Level 0–127 Output Level

Parameter

Value Description

Sync

OFF, ON

When this is set to ON, the effect is

synchronized with the tempo.

See

“About Note”

(p. 36).

Delay Time

0–1300 ms,

note

Delay time from when sound is input to

delay until the delay sound is heard.

Acceleration 0–15

When you change the delay time, this

setting specifies the time over which it will

change from the current delay time to the

new setting.

The speed of pitch change will change

together with the delay time.

Feedback -98–+98 %

Specifies the percentage (%) of the delay

sound that will be returned to the input.

Positive (+) settings return the sound at

the original phase, and negative (-) set-

tings return the phase-reversed sound.

HF Damp

200–

8000 Hz,

BYPASS

Specifies the frequency at which to cut the

high range of the delay sound returned to

the input.

Choose the BYPASS setting if you don’t

want to cut.

Low Gain -15–+15 dB Gain of the low range

High Gain -15–+15 dB Gain of the high range

Balance

D100:0W–

D0:100W

Volume balance between the direct sound

(D) and the delay sound (W)

Level 0–127 Output Level

ARX-02_e.book 29 ページ２００８年３月７日　金曜日　午後７時２２分

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 83 84

Comments to this Manuals

No comments