Roland FR-3x Owner's Manual Page 58

  • Download
  • Add to my manuals
  • Print
  • Page
    / 80
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 57
Connecting to MIDI devices
58
r
FR-3x V-Accordion
Selecting the desired MIDI LIST
parameter
1.
Press and hold the [SET] register to enter
MIDI LIST mode.
The display shows the name of the last parameter
you selected.
2.
Use treble register [5] or [6] (MIDI LIST) to
select the desired parameter.
(Here, we selected the “Chord TX/RX Channel” param-
eter.)
NOTE
Pressing registers [5] and [6] (MIDI LIST) simultaneously will
select the first parameter, “MId”.
3.
Use register [1] ( VALUE) or [2]
(VALUE ®) to set the desired MIDI channel.
To return to the last setting you saved for this
parameter, press registers [1] and [2] simultaneously.
4.
If you need to change another MIDI LIST
parameter, repeat steps 2 and 3.
5.
If you want to use this change only tempo-
rarily, press the [SET] register to leave this
mode.
Otherwise, proceed to save your changes:
Saving your changes
1.
Press and hold the [SET] register until the
display looks as follows:
2.
Press register [2] (VALUE ®) to save your
settings.
The display now looks as follows:
If you don’t want to save your changes, press [1]
( VALUE). The display briefly shows the “no” mes-
sage.
3.
Press register [7] (ENTER) to confirm your
intention.
The settings are stored internally and the display
briefly shows the “y.E.S.” message (the three dots
flash), then “don” when the settings are stored. Next,
the display returns to the master page.
MIDI LIST parameters
MIDI Out/In
This parameter allows you to define the
function of the FR-3x’s MIDI OUT/IN
socket.
Out
Select this setting if you want to play on the FR-3x’s
keyboards and transmit the MIDI data generated by
your playing to an external device.
In
Select this setting if you want to receive MIDI data
generated by an external device.
MId
CHd
3
Value Out, In
Default setting: Out
Urt
yes
mId
FR-3x GB.book Page 58 Wednesday, May 18, 2011 9:54 AM
Page view 57
1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 79 80

Comments to this Manuals

No comments