Roland Lucina AX-09 User Manual download pdf (Page 12)

Assigning the Modulation Bar’s E ect

You can also change the assignment of the modulation

bar so that it will hold notes or hold notes while applying

vibrato.

1. Hold down the [SHIFT] button and press the

modulation bar.

The current setting will blink in the display.

2. Continue to hold down the [SHIFT] button, and

use the [INC/+] / [DEC/–] buttons to assign the

desired e ect.

This speci es the e ect that will be applied when you

operate the modulation bar.

Value Explanation

N o D

Vibrato will be applied to the sounds you’re playing.

h L D

The sounds you’re playing will be sustained while you

press the modulation bar.

C N B

Vibrato and Hold will both be applied to the sounds

you’re playing.

MEMO

The same e ect is applied to all tones. However, if

you’ve selected 4 VIOLIN or 5 TROMBONE of the special

tones, the dynamics (expression) of the instrument will

be modi ed instead of the vibrato e ect.

3. Release the [SHIFT] button.

4. To save this setting, hold down the [SHIFT] button

and press the [WRITE] button.

Using the D Beam Controller

By moving your hand above the D Beam controller’s

sensor, you can modify the sound by applying the e ect

you’ve assigned to the D Beam.

The D Beam controller’s eﬀ ective range

The illustration below shows the approximate e ective

range of the D Beam controller.

No e ect will be obtained if you position your hand

outside this e ective range.

* The usable range of D Beam controller will become

extremely small when used under strong direct

sunlight. Please be aware of this when using the D Beam

controller outside.

1. Press one of the following buttons to select the

function that you want to control using the

D Beam controller.

Value Explanation

PITCH

Moving your hand above the D Beam controller

will vary the pitch of the sounds you play.

FILTER

Moving your hand above the D Beam controller

will vary the tonal character of the sounds you

play.

* For some tones, the change in character

may be di cult to notice.

ASSIGNABLE

The D Beam controller will transmit the assigned

function or control change message.

2. While you play the keyboard, move your hand

slowly up and down above the D Beam controller.

The button you pressed in step 1 will blink.

3. To turn o the D Beam controller, once again press

the button you pressed in step 1; it will go out.

Changing the ASSIGNABLE Setting

You can assign a MIDI control change number (CC) or

function to the [ASSIGNABLE] button, and use the D Beam

controller to control that parameter in real time.

1. Hold down the [SHIFT] button and press

[ASSIGNABLE].

The currently assigned function will blink in the display.

2. Continue to hold down the [SHIFT] button,

and use the [INC/+] / [DEC/–] button to specify

the desired function or parameter that will be

controlled by the D Beam controller.

Display Value Explanation

C 0 1

CC01

( MODULATION)

Apply vibrato.

C 0 5

CC05

( PORTA TIME)

Control the portamento time

over which the pitch changes

between notes when playing with

portamento.

C 0 7

CC07 ( VOLUME) Control the volume.

C 1 0

CC10 ( PAN) Control the panning.

C 1 1

CC11 ( EXPRESSION) Control the expression.

C 6 4

CC64 ( HOLD) Sustain the notes.

C 6 5

CC65

( PORTAMENTO)

Smoothly connect the pitch from one

note to the next.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 26 27

Comments to this Manuals

No comments

Roland Lucina AX-09 User Manual Page 12

Comments to this Manuals

Related products and manuals for Musical Instruments Roland Lucina AX-09