Roland Modela MDX-40 Specifications download pdf (Page 100)

Quickstart to Roland MDX-40 and Modela Player 4

100

Appendix

Up Cut

With this cutting method, the direction of tool rotation

is identical to the direction of tool movement (transfer).

Down Cut

With this cutting method, the direction of tool rotation is

opposite to the direction of tool movement (transfer).

Optimized Pitch

This reduces the cutting-in amount for areas that have a gentle slope, thereby reducing uncut areas.

The cutting-in amount is automatically adjusted within a range that does not exceed the specied

parameters.

This is enabled only in the nishing process.

Outline Only

This cuts only the outline of the model.

It creates only contour-line tool paths, without creating-scan line tool paths.

This is enabled only in the nishing process.

Spiral

This creates a spiral tool path.

You can make this setting only for the nishing process. Note, however, that this setting cannot be

made when you are performing cylindrical cutting.

For information about up cut and down cut, see the description for Contour lines above.

Cutting Start Position

This sets the point at which the tool rst approaches the workpiece.

1 2 ... 95 96 97 98 99 100 101 102

No comments

Roland Modela MDX-40 Specifications Page 100