Roland VS-640i User Manual download pdf (Page 1)

*¹ The media holder of this machine is exclusively for media with a paper tube core inner diameter of 3 inches. To use a 2 inch media core, please use the optionally available media flanges.

*² The length of printing or cutting is subject to the limitations of the program.

*³ Using Roland specified media, loaded correctly, temperature: 25°C (77°F), humidity: 50 %RH, all pinch rollers are used, 25 mm or more for both right and left margins and 35 mm or more front margin, excluding expansion or contraction of the media and all correction

and adjustment functions of this machine have been made properly. Not assured when the print heater or dryer is used.

*4 Using Roland specified media, print travel of 1m.

*5 [PREFEED] menu item must be set to "ENABLE," Range for assured repetition accuracy: [64" inch model] media over 610 mm wide, and 4,000 mm long • media over 610 mm wide or less and 8,000 mm long. [54" inch model] for media with a width exceeding

610 mm: length 4,000 mm • For media with a width of 610 mm or less: length 8,000 mm. [30" model] length 3,000 mm.

*6 Provided that media length is under 3,000 mm. Excluding possible shift caused by expansion/contraction of the media and/or by reloading the media.

*7 Using Roland specified media, 64" and 54" models: data size: 1,000 mm in the media-feed direction, 1,600 mm in the carriage-movement direction. 54" model: data size: 1,000 mm in the media-feed direction, 1,346 mm in the carriage-movement direction.

30" model: data size: 1,000 mm in the media-feed direction, 736 mm in the carriage-movement direction.

No lamination. Automatic detection of crop marks at 4 points when media is reloaded. During cutting, [PREFEED] menu item must be set to "ENABLE." Excludes possible shift caused by expansion/contraction of the media and/or by reloading the media.

*8 Warm-up is required after power up. This may require 5 to 20 minutes, depending on the operating environment. The preset temperature may fail to be reached depending on the ambient temperature and media width.

TU2-64

[

For VS-640i

]

TU2-54

[

For VS-540i

]

TU2-30

[

For VS-300i

] * Rolls up to 30kg (66 lbs.)

OndS 640A

[

For VS-640i

]

OndS 540A

[

For VS-540i

]

OndS 300A

[

For VS-300i

]

Automated take-up system

Heater and blower

Option

*It is recommended to use a

heater and blower especially for

printing with white and metallic.

640i VS

540i VS

300i

Specifications

Printing/cutting width *

Ink cartridges

Printing resolution (dots per inch)

Cutting speed

Colours

Types

Eight colours (cyan, magenta, yellow, black, light cyan, light magenta, light black, and white) or,

Eight colours (cyan, magenta, yellow, black, light cyan, light magenta, light black, and metallic silver) or,

Eight colours (cyan, magenta, yellow, black, light cyan, light magenta, metallic silver, and white) or,

Seven colours (cyan, magenta, yellow, black, light cyan, light magenta, and light black) or,

Four colours (cyan, magenta, yellow, and black)

ECO-SOL MAX2 440-cc cartridge (cyan, magenta, yellow, black, light cyan, light magenta, and light black)

ECO-SOL MAX2 220-cc cartridge (metallic silver and white)

Core diameter *

Roll weight

Roll outer diameter

Thickness

Cutting blade

Software resolution (when cutting)

Distance accuracy (when printing)

Distance accuracy (when cutting)

Repeatability (when cutting)*

Alignment accuracy for printing and cutting

when reloading media

Media heating system *

Print heater

Dryer

Connectivity

Power-saving function

Power requirements

Power

Acoustic noise level

Dimensions (with stand)

Weight (with stand) 140 kg (309 lbs)

Environmental

Power on

Power off

Max. 1,600 mm (63 in.) Max. 1,346 mm (53 in.) Max. 736 mm (29 in.)

Maximum 1,440 dpi

10 to 300 mm/s

Blade force

30 to 300 gf

76.2 mm (3 in.) or 50.8 mm (2 in.)

Max. 40 kg (88 lbs) Max. 30 kg (66 lbs) Max. 25 kg (55 lbs)

Maximum 210 mm (8.3 in.)

Maximum 1.0 mm (39 mil) with liner, for printing Maximum 0.4 mm (16 mil) with liner and 0.22 mm (9 mil) without liner, for cutting

210 to 1,625 mm (8.3 to 64 in.) 210 to 1,371 mm (8.3 to 54 in.) 182 to 762 mm (7.2 to 30 in.)

Type: Roland CAMM-1 series compatible Blade offset: 0.000 to 1.500 mm (0.000 to 0.059 in)

0.025 mm/step

Error of less than ±0.3% of distance traveled, or ±0.3 mm, whichever is greater

±0.1 mm or less

±0.5 mm or less

Error of less than ±0.5% of distance traveled, or ±3 mm, whichever is greater

Exclusive stands, power cord, blade, blade holder, media clamps, media holder, replacement blade

for separating knife, User's Manual, etc.

Error of less than ±0.4% of distance traveled, or ±0.3 mm, whichever is greater

When distance correction has been performed (when the setting for [CUTTING MENU] - [CALIBRATION]

has been made): Error of less than ±0.2% of distance traveled, or ±0.1 mm, whichever is greater

Setting range for the preset temperature: 30 to 45°C (86 to 112°F)

Setting range for the preset temperature: 30 to 50°C (86 to 122°F)

Ethernet (10BASE-T/100BASE-TX, automatic switching)

Automatic sleep feature

AC 100 to 120 V ±10%, 7.8 A, 50/60 Hz or

AC 220 to 240 V ±10%, 4.0 A, 50/60 Hz

AC 100 to 120 V ±10%, 7.5 A, 50/60 Hz or

AC 220 to 240 V ±10%, 3.8 A, 50/60 Hz

AC 100 to 120 V ±10%, 5.1 A, 50/60 Hz or

AC 220 to 240 V ±10%, 2.6 A, 50/60 Hz

Approx. 1,044 W Approx. 995 W Approx. 670 W

Approx. 14.5 W Approx. 15.1 W Approx. 14.4 W

During operation: 69 dB (A) or less During standby: 43 dB (A) or less

2,575 (W) x 795 (D) x1,270 (H) mm

(101.4 (W) x 31.1 (D) x 50 (H) in.)

130 kg (287 lbs)

2,315 (W) x 795 (D) x 1,270 (H) mm

(91.1 (W) x 31.1 (D) x 50 (H) in.)

100 kg (220 lbs)

1,700 (W) x 795 (D) x 1,270 (H) mm

(66.9 (W)x 31.1 (D) x 50 (H) in.)

Temperature: 15 to 32°C (59 to 90°F) (20°C [68°F] or more recommended), humidity: 35 to 80%RH (non-condensing)

Temperature: 5 to 40°C (41 to 104°F), humidity: 20 to 80%RH (non-condensing)

Included items

During operation

Sleep mode

Printing technology

Media

Width

Piezoelectric inkjet

ECO-SOL MAX2 Ink

ESL4-4YE

ESL4-4BK

ESL4-4LC

ESL4-4LM

ESL4-4LK

ESL4-MT

ESL4-WH

ESL4-CL

ZEC-U5025

ZEC-U5022

XD-CH2

Cleaning cartridge

Blades

Blade Holders

XD-CH3

ESL4-4MG

ESL4-4CY

Yellow, 440cc

Black, 440cc

Light cyan, 440cc

Light magenta, 440cc

Light black, 440cc

Metallic silver, 220cc

White, 220cc

Cleaning liquid, 1pc.

For thick, reflective and fluorescent vinyl, as well as sign vinyl in general, 5pcs.

For sign vinyl in general, 2pcs.

Blade holder with blade extension adjuster, made of aluminium

Blade holder with blade extension adjuster, made of resin

Magenta, 440cc

Cyan, 440cc

Model DescriptionModel

Specifications

Power requirements

OndS ***A : AC 100 to 115 V, 6 A, 50/60 Hz

OndS ***B : AC 200 to 240 V, 3 A, 50/60 Hz

Operating system

Windows

7 Professional or Ultimate (32/64-bit);

Windows Vista

Business/Ultimate (32/64-bit);

Windows

XP Professional Service Pack 2 or later (32/64-bit)

CPU

Core

™

2 Duo, 2.0 GHz or faster recommended

RAM

2 GB or more recommended

Video card and monitor

A resolution of 1,280 x 1,024 or more recommended

Free hard-disk space

40 GB or more recommended

Hard-disk file system

NTFS format

Optical drive

DVD-ROM drive

*Roland VersaWorks

is a 32-bit application, which runs on 64-bit Windows

with WoW64 (Windows 32-bit on Windows 64-bit).

About Metallic Silver and White Inks

Due to the nature of white and silver inks, the pigment in these inks will settle in the cartridge and ink flow system, requiring you to shake the cartridge before each use. Outdoor durability is

three years for CMYK inks, one year for white ink, and one to three years for metallic silver ink, depending on the media used. Roland strongly recommends lamination for both indoor and

outdoor graphics to ensure the quality of metallic inks.

Roland VersaWorks System Requirements

Options

www.rolanddg.co.uk

AUTHORISED DEALER:

Roland reserves the right to make changes in specifications, materials or accessories without notice. Your actual output may vary. For optimum output quality, periodic maintenance to critical components may be required. Please contact your Roland dealer for details. No guarantee or warranty is implied other than expressly stated. Roland shall not be liable for any incidental or consequential damages, whether

foreseeable or not, caused by defects in such products. Adobe, PostScript, PostScript 3 and the PostScript logo are trademarks of Adobe Systems Incorporated. PANTONE

is the property of Pantone LLC. All other trademarks are the property of their respective owners. Reproduction or use of copyrighted material is governed by local, national, and international laws. Customers are responsible for observing all

applicable laws and are liable for any infringement. Roland DG Corp. has licensed the MMP technology from the TPL Group.

Roland DG products that feature this environmental label meet the company’s criteria for environmental

consciousness, a set of standards based on ISO 14021 self-declaration type II. For more information, please visit

www.rolanddg.com.

1 2 3 4 5 6

Summary of Contents

Page 1 - AUTHORISED DEALER:

*¹ The media holder of this machine is exclusively for media with a paper tube core inner diameter of 3 inches. To use a 2 inch media core, please use

Page 2 - BEYOND IMAGINATION

WhMtLkC C M M Y Y K KC M Y K Lc Lm LkMtC M Y K Lc Lm LkWhC M Y K Lc LmWhMtC M Y K Lc Lm Lk*Automated ink circulation system preventsthe pigment in ink

Page 3

*¹ The media holder of this machine is exclusively for media with a paper tube core inner diameter of 3 inches. To use a 2 inch media core, please use

Page 4

WhMtLkC C M M Y Y K KC M Y K Lc Lm LkMtC M Y K Lc Lm LkWhC M Y K Lc LmWhMtC M Y K Lc Lm Lk*Automated ink circulation system preventsthe pigment in ink

Page 5

WhMtLkC C M M Y Y K KC M Y K Lc Lm LkMtC M Y K Lc Lm LkWhC M Y K Lc LmWhMtC M Y K Lc Lm Lk*Automated ink circulation system preventsthe pigment in ink

Page 6

*¹ The media holder of this machine is exclusively for media with a paper tube core inner diameter of 3 inches. To use a 2 inch media core, please use