Roland M-1000 Owner's Manual download pdf (Page 13)

USB Audio

When Using Windows XP/2000 (WDM Driver/MME Driver)

The M-1000 Driver CD-ROM includes two different drivers for use with Windows

XP and Windows 2000, the WDM driver and the MME driver.

You cannot have both installed; select one according to the software you are using.

WDM Driver

Use this driver if you have SONAR or a similar application set to WDM Driver

mode. This will allow you to obtain very good audio performance.

* 24-bit resolution is not available with Cool Edit, Media Player, and other applications

that have no WDM Driver mode.

MME Driver

Cool Edit and similar programs that have no WDM Driver mode cannot be used

with 24-bit resolution.

* The MME driver cannot be used with SONAR or similar applications while in WDM

Driver mode.

■ Standard Driver Mode

This mode is operational when the [ADVANCED] USB indicator is off.

This mode uses the standard USB drivers included with Windows and Macintosh.

In Standard Driver mode, audio signals exchanged between the M-1000 and the

computer feature 16-bit resolution, with sampling frequencies of 44.1 kHz and 48

kHz supported. Set the M-1000 to this mode when using applications in which audio

CDs are played back with the computer's built-in CD-ROM drive, that involve the

use software synthesizers included with Windows and Macintosh, or that utilize

functions specific to the Windows or Macintosh systems themselves.

* Drivers included with Windows and Macintosh do not support ASIO.

* The use of MacOS under MacOS 9.0.4 is not supported (standard driver mode).

WDM:

Win32 Driver Model

MME:

Microsoft Multimedia

Extensions

You cannot have both the WDM Driver and MME Driver installed at the

same time. Select one, then install that driver. If after installing one of the

drivers you want to change it, always be sure to delete the installed driver

before installing the new driver.

→ “Deleting the Special Drivers (Uninstall)” (p. 15)

Using the M-1000 After Switching Between Advanced Mode and

Standard Driver Mode

If you have both a special driver and the standard drivers installed, you

can then use the M-1000's USB driver select button (the CLOCK SOURCE

select button) to switch between Advanced mode and Standard Driver

mode.

* To enable the setting, quit all applications using the M-1000, including the

sequencer software, then turn the M-1000's power off, then on again.

→ “Procedure for Changing the Settings” (p. 11)

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 28 29

Comments to this Manuals

No comments

Roland M-1000 Owner's Manual Page 13

Comments to this Manuals

Related products and manuals for Supplementary music equipment Roland M-1000