Roland HP-203 Owner's Manual download pdf (Page 84)

Connecting to Other Devices

By connecting an external MIDI device and exchanging

performance data, you can control one device from the other.

For instance, you can output sound from the other instrument

or switch Tones on the other instrument.

When the HP203 is connected to a MIDI sequencer,

set it to “Local Off.” Refer to p. 73.

Making the Connection

Turn the volume all the way down on the

HP203 and on the MIDI device you’re about to

connect.

Switch off the power to the HP203 and the

MIDI device you’re about to connect.

Use a MIDI cables (sold separately) to connect

the MIDI connectors to each other.

Switch on the power to the HP203 and the

connected device.

Adjust the volume level on the HP203 and the

connected device.

You should also set the MIDI transmit channel

as needed (p. 74).

Connecting to MIDI Devices

Connecting a MIDI Sequencer

to the HP203

What’s MIDI?

MIDI, short for “Musical Instrument Digital Interface,” was

developed as a universal standard for the exchange of

performance data between electronic instruments and

computers.

The HP203 is equipped with MIDI connectors to let it

exchange performance data with external devices. These

connectors can be used to connect the HP203 to an

external device for even greater versatility.

MIDI Out/In

connectors

OUT

MIDI

Roland MT Series

MIDI cables

Producing Sounds from a MIDI Sound

Module by Playing the HP203

THRU OUT

MIDI

MIDI Sound Module

MIDI Out

connector

MIDI cable

HP203_e.book 82 ページ２００７年７月１７日　火曜日　午前１０時４６分

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 107 108

Comments to this Manuals

No comments

Roland HP-203 Owner's Manual Page 84

Comments to this Manuals

Related products and manuals for Synthesizer Roland HP-203