Roland Digital Piano LX-10F User Manual download pdf (Page 71)

Troubleshooting

If you think there’s a problem, read this first.

Symptom

Cause/Action Page

Power does not turn on

Is the power cord connected correctly? p. 14

Nothing appears in the screen

Since the LX-10F uses a liquid crystal screen, it may happen that no text or graphics appear in the screen if the

temperature is below zero degrees Celsius (32 degrees Fahrenheit).

—

Pedal does not work, or is “stuck”

Is the pedal connected correctly?

Plug the cable firmly into the pedal connector.

p. 14

If you disconnect the pedal cord from the LX-10F while the power is on, the pedal effect may remain “stuck” in the

On condition.

You must power-off the LX-10F before connecting or disconnecting the pedal cord.

—

Could you have changed how the pedal effect is applied?

If the damper pedal part is set to Right, the pedal will apply only to the right tone; if it is set to Left, the pedal will

apply only to the left tone.

p. 58

Could Twin Piano be turned on?

If Twin Piano is on, the right pedal will affect only the right-hand keyboard zone and the left pedal will affect only

the left-hand keyboard zone.

p. 27

Could you have changed the function of the pedal?

If you’ve switched the function of the soft pedal or sostenuto pedal, these pedals will not operate as the soft pedal

or sostenuto pedal.

p. 58

Unable to read from/write to USB memory

Are you using (optional) Roland USB memory?

Reliable performance cannot be guaranteed if you use non-Roland USB memory products.

—

If you are unable to read or write USB memory successfully, change the External Memory setting. p. 61

“Buzz” is heard from external devices

Are the external devices connected to more than one AC power outlet?

If you connect external devices, be sure to connect them to the same AC outlet.

—

Device connected to the Input jacks have

insufficient volume

Could you be using a connection cable that contains a resistor?

Use a connection cable that does not contain a resistor.

—

No sound

Is the speaker cable connected correctly? p. 14

Could the LX-10F’s volume or the volume of the connected equipment be turned down? p. 17

Could headphones be connected?

Could there be a plug inserted in a headphone jack?

The speakers will not produce sound if headphones or plug are connected to the headphone jacks.

p. 18

Has Local Control been set to “Off”?

When Local Control is set to Off, no sound is produced by playing the keyboard. Set Local Control to On.

p. 68

Could Twin Piano mode be set to “Individual”?

If headphones are connected when Twin Piano is “on” and the mode is set to “Individual,” notes played in the left-

hand keyboard zone will not be heard from the headphones connected to the right Phones jack. Similarly, notes

played in the right-hand keyboard zone will not be heard from the headphones connected to the left Phones jack.

p. 28

No sound when you play back a song

Has Local Control been set to “Off”?

When Local Control is set to Off, no sound is produced by playing the song. Set Local Control to On.

p. 68

Could the song volume be set to “0”? p. 39

No sound from the leftmost notes of the

keyboard

Is V-LINK switched on?

When V-LINK is on, the lowest twelve notes of the keyboard are used to control the image, and will not produce

sound.

p. 70

No sound (when a MIDI device is connected)

Are all devices powered on? —

Are the MIDI cables connected correctly? p. 67

Do the MIDI channels of the LX-10F and the connected device match? p. 68

LX-10F_e.book 71 ページ２０１０年１月１４日　木曜日　午後１０時４５分

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 87 88

Comments to this Manuals

No comments

Roland Digital Piano LX-10F User Manual Page 71

Comments to this Manuals

Related products and manuals for The input devices Roland Digital Piano LX-10F