Roland HP 237R User Manual download pdf (Page 36)

Connecting to Audio Equipment

When you connect the HP 237R to audio equipment, you can

play the sounds from the HP 237R through the speakers on

the audio equipment or record your performances on a tape

recorder or other recording device.

■ Connectors

fig.09-10

Output Jacks

You can connect audio equipment using audio cables (sold

separately) and play the sounds from the HP 237R through

the speakers on the connected equipment or record your

performances on a tape recorder or other recording device.

If the output of the connected device is monaural, you must

use the L (Mono) jack.

Input Jacks

You can connect another sound source, such as audio

equipment or an electronic instrument using audio cables

(sold separately) and play the sounds from the connected

device through the speakers on the HP 237R.

If the output of the connected device is monaural, you must

use the L (Mono) jack.

■ Making the Connections

* To prevent malfunction and/or damage to speakers or other

devices, always turn down the volume, and turn off the power

on all devices before making any connections.

* Always make sure to have the volume level turned down before

switching on power. Even with the volume all the way down,

you may still hear some sound when the power is switched on,

but this is normal, and does not indicate a malfunction.

❍ Playing Sounds from the HP 237R Through the

Speakers on Audio Equipment or Recording

Your Performances on a Recording Device

fig.59

1. Turn the volume all the way down on the

HP 237R and on the device you’re about to

connect.

2. Turn off the power to the HP 237R and

other connected equipment.

3. Use audio cables (sold separately) to make

the connection.

4. Turn on the power of the HP 237R.

5. Switch on the connected device.

6. Adjust the volume level on the HP 237R

and the connected device.

When Recording HP 237R Performances on a Recording

Device

7. Start recording with the connected device.

8. Play the keyboard.

9. When the performance ends, stop

recording on the connected equipment.

❍ Playing Audio Equipment Sounds Through the

Speakers on the HP 237R

fig.60

1. Turn the volume all the way down on the

HP 237R and on the device you’re about to

connect.

2. Turn off the power to the HP 237R and

other connected equipment.

3. Use audio cables (sold separately) to make

the connection.

4. Turn on the power to the connected

equipment.

5. Turn on the HP 237R.

6. Adjust the volume level on the HP 237R

and the connected device.

❍ Turning the Power Off After Use

After use, follow the steps below to switch off the power.

1. Turn the volume all the way down on the

HP 237R and on the device you’re about to

connect.

2. Turn off the power to the HP 237R.

3. Turn off the connected equipment.

Output

(

Mono

)

Input

(

Mono

)

StereoStereo

HP 237R

Input R/L

(Line In, Aux In)

InOut

Pedal

MIDI

Output

(

Mono

)

Input

(

Mono

)

StereoStereo

Output R/L

(Line Out, Aux Out)

HP 237R

InOut

Pedal

MIDI

Output

(

Mono

)

Input

(

Mono

)

StereoStereo

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 42 43 44

Comments to this Manuals

No comments

Roland HP 237R User Manual Page 36

Comments to this Manuals

Related products and manuals for The input devices Roland HP 237R