Roland VC-200HD User Manual

Copyright © 2007 ROLAND CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of

10Panel Descriptions1 i.LINK Connector (Front Panel)This connector handles the input/output of HDV/DV signals and allows for connection of HDV/DV vide

11Panel Descriptions6 DisplayShows the Status screens (four types) indicating the status of the unit. Pressing the PAGE button cycles you through the

12Panel Descriptions1 AC InletAccepts connection of the supplied power cord.2 AUDIO OUTPUT Connectors CH1 and CH2 Connectors (XLR Type/Balanced Type)

13Panel Descriptions10 TERMINATOR SwitchSwitch this on when you don’t want to loop-through the synchronizing signal from the REF OUTPUT connector.11 R

14ConnectingConnect the VC-200HD or VC-300HD in the way that is appropriate for the intended purpose.This section describes how the various connection

15ConnectingHD component video can be converted to HDV, and the HD video can be recorded onto HDV tape. When recording HD component output from an HD

16Connecting6 Select the output format.6-1. Press the OUTPUT button until "300: Video Out Format" is shown in the display.6-2. Use the VAL

17ConnectingSince the VC-300HD/VC-200HD offers HD-SDI input, the HD-SDI or SDI from an HD video device can be converted to HDV.The output from the HD

18Connecting6 Select the output format.6-1. Press the OUTPUT button until "300: Video Out Format" is shown in the display.6-2. Use the VAL

19ConnectingDVI or VGA output from a computer can be converted to HDV, and the high resolution images can be recorded to a video. Because the computer

2 IMPORTANT SAFETY INSTRUCTIONSCAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIRCAUTION: TO REDUCE THE RIS

20Connecting6 Select the output format.6-1. Press the OUTPUT button until "300: Video Out Format" is shown in the display.6-2. Use the VAL

21ConnectingWhen video recorded in HDV is converted to HD component, it can be used as HD analog video on an HD video device or in an HD linear editin

22Connecting6 Select the output format.6-1. Press the OUTPUT button until "300: Video Out Format" is shown in the display.6-2. Use the VAL

23ConnectingVideo recorded in HDV can be converted to HD-SDI and copied to an HD video device, such as HDCAM or DVCPRO HD, or transmitted over a long

24Connecting5 Select the output format.5-1. Press the OUTPUT button until "300: Video Out Format" is shown in the display.5-2. Use the VAL

25ConnectingAttaching the Rubber Feet (included)Please attach the feet as necessary; for example, when using the VC-300HD/VC-200HD without mounting it

26Basic Operations941● Once the connections have been completed (p. 14), turn on power to your various devices in the order specified. By turning on

Basic Operations27This unit has several sound input connectors: AUDIO INPUT connectors, i.LINK connector, and HD-SDI connector (VC-300HD only). At the

Basic Operations28The VC-300HD/VC-200HD can easily output test patterns or test tones.1 Press the OUTPUT button until "390: Test Pattern" or

Basic Operations29The display shows the status of the device. It also shows the menu screens for the various settings.* The display may be difficult t

3 Table of Contents USING THE UNIT SAFELY ...4IMPORTANT NOTES ...6Fe

Basic Operations30The Menu screen is shown on the display when the MENU button is pressed. Various settings for the VC-300HD/VC-200HD are performed on

31Appendices

32Menus and settings* See Menu Display and Operation (p. 30) for menu operations.100–162 Input Parameter* The values enclosed in a [box] are the facto

33Menus and settings100–162 Input Parameter (continued)200–275 Processing Parameter* The values enclosed in a [box] are the factory defaults.Item Numb

34Menus and settings200–275 Processing Parameter (continued)* The values enclosed in a [box] are the factory defaults.* For items 201-212 and 220-224,

35Menus and settings200–275 Processing Parameter (continued)* The values enclosed in a [box] are the factory defaults.300–391 Output Parameter* The va

36Menus and settings300–391 Output Parameter (continued)Note: For item numbers 351, 353, and 354, please adjust whilee confirming with headphones.Note

37Menus and settings400–452 SDI Parameter Note: The values enclosed in a [box] are the factory defaults.900–999 System Parameter * The values enclosed

38Input / Output SignalHDV (High Definition Video) is the standard term used for the format to record High-definition television (HDTV) onto DV tape u

39Installation and MaintenanceThe rack mounts fittings for this device can be installed or removed.Cautions regarding removing the rack mount fittings

4 USING THE UNIT SAFELY 001 • Before using this unit, make sure to read the instructions below, and the Owner’s Manual. ...

40TroubleshootingIf damage is suspected, please check the following again. If the problem persists after checking the following, please consult with a

41Main SpecificationsVC-200HD / VC-300HD: MULTI-FORMAT CONVERTERVideo Input Format❥ IEEE1394 (i.LINK)HDV: 1080/59.94i, 1080/50i, 720/59.94p, 720/50pD

Main Specifications42Video Connectors IEEE1394 Connector(i.LINK)6-pin Type, conforms to IEEE1394, HDV standards, Same connector on front and rear❥ COM

Main Specifications43VC-200HD Block DiagramCOMPONENT IN DVI-I INSDI INHD-SDIYCH1CH2CH3CH4DIGITALANALOGPbPrYCH1CH2CH3CH4DIGITALANALOGPbPrREF INAUDIO IN

Main Specifications44VC-300HD Block DiagramVC-300HD AUDIO BLOCK DIAGRAMVC-200HD AUDIO BLOCK DIAGRAM450 SDI OUT Audio Ch331AudioOutCh3&4Lv391Test T

Main Specifications45The following lists the video formats that can be output with the output connectors mounted on this device.indicates that the com

46IndexNumerics32 kHz ... 27, 3348 kHz ...

47This product complies with the requirements of European Directives EMC 89/336/EEC and LVD 73/23/EEC.For EU CountriesFor CanadaThis Class B digital a

04564356 07-3-1N*04564356-01*

USING THE UNIT SAFELY 5 012a • Immediately turn the power off, remove the power cord from the outlet, and request servicing by your retailer, the nea

6 IMPORTANT NOTES 291b In addition to the items listed under “IMPORTANT SAFETY INSTRUCTIONS” and “USING THE UNIT SAFELY” on pages 2 and 4–5, please r

7 Features HDV/DV Conversion Feature This converts analog component, DVI-I, or SDI (HD/SD) signals to HDV or DV in real time. It can also go the othe

8Checking the Included ItemsThe VC-300HD/VC-200HD is packaged with the following items. Please check that all of the items are included.* If you find

9Basic Operation