Roland MA-9 Owner's Manual download pdf (Page 8)

8

Getting Connected and Installing Drivers English

Windows 98 users

* The driver necessary for using the MA-1EX

with Windows 98 is provided on the Windows

CD-ROM. Make sure that you have the

Windows CD-ROM available.

* Some computers are sold with the contents of

the Windows CD-ROM stored on the hard

disk, and therefore will not come with a

Windows CD-ROM. If this is the case for your

computer, you’ll be able to install the driver

even without the Windows CD-ROM.

* The

USB composite device

driver is

installed first, then the

USB audio device

driver is installed. Use the following

procedure to install the drivers.

1.

With the MA-1EX disconnected, start up

Windows.

* Disconnect all USB cables except for a USB

keyboard and USB mouse (if used).

* Exit all currently running software

(applications).

If you are using a virus checker or similar

software, be sure to exit it as well.

2.

Use the USB cable to

connect the MA-1EX to

your computer, and

turn on the MA-1EX’s

power (turn the

VOLUME knob toward the right).

* This unit is equipped with a protection circuit.

A brief interval (a few seconds) after

connecting a USB connector is required before

the unit will operate normally.

3.

USB composite device

will be detected

automatically, and the

“Add New

Hardware Wizard”

dialog box will

appear. Click

[Next]

.

4.

When

“What do you want Windows to

do?”

appears, select

“Search for the

best driver for your device

(Recommended)

,

”

and click

[Next]

.

fig.05-27e_30

5.

A dialog box like the one shown will

appear.

Check

CD-ROM drive

, and click

[Next]

.

* If the display indicates

“Can’t find an updated

driver for this device

,

”

check

“Updated

driver

,

”

and click

[Next]

.

6.

A dialog box like the one shown will

appear.

Click

[Next]

.

* Depending on your system, the

Driver

location

may differ from the illustration, but

this is not a problem.

7.

File (driver) copying will begin.

If the Windows CD-ROM is not inserted

in the CD-ROM drive, a “Insert Disk”

dialog box may appear. In this case, insert

the Windows CD-ROM into the CD-ROM

drive and click [OK].

MA-1EX_efgis.book 8 ページ２００５年１０月３１日　月曜日　午後２時３０分

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Comments to this Manuals

No comments