Roland MV-8000 Owner's Manual download pdf (Page 59)

Effect

fig.10-37e

Velo Sens (Velocity Sens)

Sets the degree to which the cutoff frequency reflects

the value of the Velocity in Common. As the value is

increased, the cutoff frequency which follows the

Velocity (the strength or force at pressing key) gets

higher.

Value: 0–100

Cutoff KF (Cutoff Key Follow)

This setting determines whether the cutoff frequency

changes according with the Note Number in Common

(On) or not (Off).

Value: Off, On

Ext Lev Follow (External Level Follow)

Sets the degree to which the linked external input

volume level changes the cutoff frequency. As the

value is increased, you get an effect in which the tone

changes more dynamically according to the rhythm of

the input.

Value: -100–100

Virtual VCA

This reproduces, virtually, the VCA (Voltage

Controlled Amplifier).

Sounds from the VCF are amplified as they change

over time, and the resulting amplified volume levels

and changes are then output.

Initial Gain

Sets the reference volume. When set to any value

except 0, sound plays even when the Trigger In is

turned Off, with the volume increasing as the value is

increased. (Volume changes based on the envelope,

LFO, or other input are added to this volume level.)

Thus, when setting Trigger In for regulation of sound

expression, set this to 0, and regulate the volume with

the envelope depth.

Value: 0–100

Envelope

Depth

Sets the depth of the envelope (the function of

changing the amplifier’s volume over time).

Value: 0–200

A (Attack Time)

The elapsed time from when Trigger In is switched

“On” to the point of maximum volume.

Value: 0–100

D (Decay Time)

The elapsed time from the point of maximum volume

until reaching the sustain level (next item).

Value: 0–100

S (Sustain Level)

The volume level after passage of the decay time

(previous item) up until Trigger In is switched “Off.”

Value: 0–100

R (Release Time)

The elapsed time from when Trigger In is switched

“Off” until the volume reaches its minimum value.

These are the volume envelope settings. Select the contour

with attack, decay, sustain, and release, and set the degree of

effect with the envelope depth.

Value: 0–100

TRIGGER IN

ON OFF

Attack Time

Decay Time

Release Time

Sustain Level

MV-8000v3_e.book 59 ページ２００５年１１月２９日　火曜日　午後５時２５分

1 2 ... 54 55 56 57 58 59 60 61 62 63 64

Comments to this Manuals

No comments

Roland MV-8000 Owner's Manual Page 59

Comments to this Manuals

Related products and manuals for Audio equalizers Roland MV-8000