Roland Octa-Capture User Manual download pdf (Page 6)

Version 1.5 Functions

Screen Items and what They Do

Main Window

Preamp Control screen

Auto Sens button

Preamp Control

Device Panel

Screen

switching

button

Direct Mixer Control screen

Screen

switching

button

Multi-Monitor button

Direct Mixer Control

Device Panel

Reverb

Send

Reverb Type

Reverb Return

Multi-Monitor button

This causes direct mixers B, C, and D to be shown in addition to direct mixer A. The various outputs from these will be patched to OUTPUTs 1–8.

Screen switching buttons

Use these buttons to switch between the Preamp Control screen and the Direct Mixer Control screen.

Preamp control

Preamp section

Screen indication Setting Explanation

SENS Input gain Adjusts the input signal’s gain over a range of 0–50 dB, in steps of 0.5 dB.

+48 +48 V phantom power

Supplies phantom power. Turn this on if you’re using a device that requires phantom power, such as a

condenser mic.

Hi-Z

Impedance select (channels

1 and 2 only)

Choose the Hi-Z (ON) setting if you’ve connected a guitar, and choose the Lo-Z (OFF) setting if you’ve

connected any other device.

PHASE Phase Inverts the phase of the input signal.

LO-CUT Low cut Enables the low-cut lter for the input. The cuto frequency is 100 Hz.

Level meter

Indicates the status of the signal being input to the preamp section.

Its function is identical to that of the indicator shown in the LCD screen of the OCTA-CAPTURE itself

(Owner’s Manual p. 33).

Auto Sens button

Used to set the Auto Sens function (Owner’s Manual p. 37).

Clicking this will open the Auto Sens setup dialog box.

Select the channel for which you want to carry out Auto Sens, and then click [Start].

1 2 3 4 5 6 7 8 9 10 11 ... 22 23

Comments to this Manuals

No comments

Roland Octa-Capture User Manual Page 6

Comments to this Manuals

Related products and manuals for Audio mixers Roland Octa-Capture