Roland X-7 Owner's Manual download pdf (Page 23)

Tips for sampling the external input

When sampling from the external input, the most important thing is to set the level correctly.

It is best to sample at as high a volume as possible, but excessive volume will cause distortion.

To get the best results, refer to the following points as you make settings.

• Use the INPUT level knob to adjust the input level. (Make sure that the red indicator does not light.)

• Press [SAMPLING] to access the Sampling Standby screen.

Watch the level meter to see whether the far right indicator lights.

• If it lights, hold down [SHIFT] and press [MIX IN], and lower the “Mix In Output Level.”

• Press [SAMPLING] to access the Sampling Standby screen.

Watch the level meter to see whether the far right indicator lights.

• If it lights, hold down [SHIFT] and press [MIX IN], and lower the “Mix In Output Level.”

* When sampling from the digital input, set “Digital Input Level” to 127.

→

“Making Input Source Settings (Input Setting)”

(p. 141) in Owner’s Manual

When using analog input

When using digital input

Analog input Digital input

Analog level

setting

Sampling level

setting

Make sure that

the far-right meter

indicator does not

light

Make sure that

the indicator

does not light

Samplig

Set as

desired

Set as

desired

Fantom-X_HB_e.book 23 ページ２００５年５月２４日　火曜日　午前１１時１２分

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 83 84

No comments

Roland X-7 Owner's Manual Page 23