Roland TD-8 Owner's Manual download pdf (Page 37)

Specifying Pads and Performing

Quick Start

Press CURSOR [ ] to move the cursor to the BANK number.

fig.Q2-011

Press [INC/+] or [DEC/-] or rotate the VALUE dial to select the

BANK number.

Press CURSOR [ ] to move the cursor to TRIGGER TYPE.

fig.Q2-012

Strike the pad to be set.

The cursor moves to the setting value of the pad being struck.

Press [INC/+] or [DEC/-] or rotate the VALUE dial to select the

name for the type of pad used (Trigger type).

Repeat Steps 6 and 7 to set the trigger type for each pad.

Press [KIT].

The “DRUM KIT” screen appears.

fig.Q2-013

When connecting the PD-80, PD-80R, PD-100, or PD-120 to

TRIGGER INPUT 3 (SNARE), follow the procedure described on p.

38 to set the head tension.

This completes the settings for the pads. Follow the procedure

described on p. 40 to check the settings.

You can also select pads by

using [TRIG SELECT]

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 223 224

No comments

Roland TD-8 Owner's Manual Page 37