Roland VS-1680 Owner's Manual download pdf (Page 105)

EFX1 (Effect Insert Switch)

This sets how the effects are connected.

Off: There is no Insert.

Ins: Inserts in both channels of the stereo effect.

InsL: Inserts in the left channel of the stereo effect.

InsR: Inserts in the right channel of the stereo effect.

InsS: Inserts in the combined left and right channels

of the stereo effect in series.

fig.05-05(inslrs.eps)

* When Ins or InsS is selected, that effect cannot be used on

any other channel. Furthermore, when InsL or InsR is

selected, that effect can be inserted on only one other

channel.

Snd (Insert Send Level)

This adjusts the level of the signal (-42–6 dB) sent to

the Insert effect. Set the initial value to “0 dB.”

Rtn (Insert Return Level)

This adjusts the level of the signal (-42–6 dB) returned

from the Insert effect. Set the initial value to “0 dB.”

5. At this point, you are ready to insert EFX1 into the

selected channel. Press [PLAY (DISPLAY)].

Return to Play condition.

* You can insert EFX2–EFX4 in the same way.

Inserting an Effect into the Master

Block

This inserts the effect into the MASTER Out. After the

mix for each channel is completed, the entire song is

put through the compressor, which is convenient at

such times as when you listen to the total volume

while mixing down.

1. Press [MASTER].

The button indicator lights, and the Master screen

appears in the display.

2. Press [F1 (Ef1In)]. If “Ef1In” does not appear in

[F1], first press [PAGE] until “Ef1In” is displayed,

then press [F1 (Ef1In)]. Alternatively, use [ ],

[ ], [ ], and [ ] to move the cursor to

“EFXIns.”

3. Press [YES].

4. Use [ ], [ ], [ ], and [ ]] to move the

cursor. Rotate the TIME/VALUE dial.

fig.05-06(masterins.eps)

EFX1 (Effect Insert Switch)

This sets how the effects are connected.

Off: There is no Insert.

Ins: Inserts in both channels of the stereo effect.

Snd (Insert Send Level)

This adjusts the level of the signal (-42–6 dB) sent to

the Insert effect. Set the initial value to “0 dB.”

Rtn (Insert Return Level)

This adjusts the level of the signal (-42–6 dB) returned

from the Insert effect. Set the initial value to “0 dB.”

5. At this point, you are ready to insert EFX1 into the

Master Block. Press [PLAY (DISPLAY)].

Return to Play condition.

* You can insert EFX2–EFX4 in the same way.

(2band, 3band)

EFX

Ins

(2band, 3band)

EFX

InsL

(2band, 3band)

EFX

InsR

(2band, 3band)

EFX

InsS

Insert Return Level

Insert Send Level

Effect Insert Switch

Chapter 5 Using the Internal Effects (VS8F-2)

105

Chapter 5

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 211 212

Comments to this Manuals

No comments

Roland VS-1680 Owner's Manual Page 105

Comments to this Manuals

Related products and manuals for Musical Instruments Roland VS-1680