Roland VS-1824 Owner's Manual download pdf (Page 8)

Troubleshooting

When synchronizing using a MIDI

sequencer as the master, the VS-1824

does not respond to the sequencer

messages

• The MIDI cable is not connected correctly.

• The MIDI cable is broken.

• You are trying to synchronize using the MIDI clock.

→ The VS-1824 cannot be run in slave mode using a

method other than MTC.

• The EXT indicator is off (“Sync Source” is set to “INT”).

• The two devices are not set to the same type of MTC

(during MTC synchronization).

• The settings of the MIDI sequencer are not correct.

• The VS-1824 is not in playback standby mode (with the

PLAY indicator blinking).

• MTC reception is in poor condition.

→ Setting the Sync Error Level to “5” or higher may

improve conditions.

With a video device as the master, the

VS-1824 does not respond

• The cable connected to the L-connector, the SYSTEM E

connector or the MIDI cable is not properly connected.

• The MIDI cable is broken.

• The EXT indicator is off (“Sync Source” is set to “INT”).

• “SysEX.Rx.” (System Exclusive Receive Switch) is not set

to “On.”

• “MMC” (MMC mode) is not set to “SLAVE.”

• The MTC frame rate of the video device differs from that

of the SI-80SP (Roland Video MIDI Sync Interface), or the

video and the VS-1824 are not set to the same type of

MTC.

• MTC reception is in poor condition.

→ Setting the Sync Error Level to “5” or higher may

improve conditions.

Other problems

Data on the disk drive was not saved

properly

• The VS-1824’s power was turned off without performing

the shutdown process.

• The power was turned off while the disk drive was

operating.

•A strong shock was applied to the disk drive.

• The disk drive or SCSI cable was connected or

disconnected while the power was still turned on.

→ Reinitialize the disk drive (and also execute physical

formatting) (Owner’s Manual p. 229). Also, we

recommend that you execute Surface Scan as well

(Owner’s Manual p. 231).

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 139 140

Comments to this Manuals

No comments

Roland VS-1824 Owner's Manual Page 8

Comments to this Manuals

Related products and manuals for Musical Instruments Roland VS-1824