Roland SONAR V-STUDIO VS-100 Specifications

VS-100_install_e.book 1 ページ ２００９年３月１２日　木曜日　午後６時３分

10 Installation and Registration 11. The lower right corner of the screen will indicates “Installing device driver software,” and the driver will be

11 Installation and Registration 6. Click [Next] to begin installation. * If the “Software Installation” dialog box appears, click [Continue Anyway

12 Installation and Registration 5. Perform the following procedure before you connect the SONAR V-STUIDO 100 hardware to your computer. 1. Minimize

13 Installation and Registration 6. Wait until the lower right of the screen indicates “Found New Hardware” and the “Found New Hardware Wizard” appea

14 Installation and Registration * Do not connect the SONAR V-STUDIO 100 hardware to your computer until you are directed to do so.* If the Authentic

15 Installation and Registration Installing the software This is a package containing AU and VST compatible plug-ins.It contains a variety of plug-in

16 Installation and Registration Connecting 1. Minimize the SONAR V-STUDIO 100 hardware’s [MAIN MIX] knob. 2. Connect the included AC adaptor to the

17 Installation and Registration Connect your headphones and/or speakers to the SONAR V-STUDIO 100 hardware.* This package does not include sound rep

18 Installation and Registration Before you install SONAR, take a minute to register the software so we can let you know when updates become availabl

19 Installation and Registration SONAR is easy to install. All you need to do is choose the folder where the program and sample project files shouldb

Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” (Hardware Manual p. 3) and “MPORTANT NOTES” (Hardware Manual p

20 Installation and Registration Before SONAR VS can communicate with the SONAR V-STUDIO 100 hardware, you must enable and assign the VS-100 MIDI por

21 Initial Settings As described below, configure SONAR so that you can use the SONAR V-STUDIO 100 hardware as an audio driver.You’ll need to make th

22 Initial Settings 7. Click “OK” to close the dialog box. If you’re asked to restart SONAR, do so.* If the window does not close or the settings are

23 Initial Settings You can also set the following options as necessary. • Execute the “Options | Audio” command to open the “Audio Options” dialog b

24 Initial Settings Audio Options dialog—Drivers tab Friendly Names For each driver, you can change the driver names that are displayed in SONAR. If

25 Initial Settings Here’s how to specify the MIDI devices that you want to use. 1. Execute the “Options | MIDI Devices” command to open the “MIDI De

26 Initial Settings Caution regarding MIDI Devices When using the SONAR V-STUDIO 100 with a ReWire client such as Project5 Set your MIDI keyboard or

27 Initial Settings Before you use the SONAR V-STUDIO 100 hardware to control SONAR, load the VS-100 plug-in and configure settings to enable it. 1.

28 Initial Settings By default, the VST plug-ins included with SONAR are installed in the following folder, and can be used from SONAR without changi

29 Initial Settings SONAR VS contains audio demo songs. Here’s how to enjoy these demo songs. The demo songs included with SONAR are created at a sam

3 This manual (SONAR V-STUDIO 100 Getting Started) provides basic information about how to set up the SONAR V-STUDIO 100, make initial settings, and

30 Initial Settings If you don’t hear sound If you don’t hear sound, check the settings of the audio interface and your sound reinforcement equipment

31 Initial Settings If the DISK meter indicates a high value fig.meterDISK.eps The DISK meter is located on the Status bar, which is at the bottom of

32 Initial Settings In order to record audio, you’ll connect your instrument or microphone to the SONAR V-STUDIO 100. Some typical types of connectio

33 Initial Settings Connecting a guitar or bass Connect your electric guitar or electric bass to the INPUT 1L LINE jack, and turn on the Hi-Z button.

34 Initial Settings 1. Launch SONAR. 2. From the File menu, choose New to open the New Project File dialog box. 3. In the Name field of the

35 Initial Settings Now we’ll configure input settings in SONAR as appropriate for the input you connected. 1. Press the SONAR V-STUDIO 100’s [SHIFT]

36 Initial Settings If you’re recording from a device connected to INPUT 1L or INPUT 2R, adjust the levels as follows.In order to record with the bes

37 Initial Settings We’ll arm track 1 for recording (i.e. put it in record-ready mode). 1. Press the SONAR V-STUDIO 100’s [DISPLAY] button to switc

38 Initial Settings 1. Choose the SONAR menu item Option|Project , and click the Metronome tab. 2. Select the “Use Audio Metronome” check box. 3

39 Initial Settings Press the record button to start recording.Press the stop button to stop recording.Press the play button to hear the record

4 Contents About This Manual...

40 Initial Settings SONAR provides a wide variety of plug-in effects.In this example, we’ll apply a plug-in effect to the track you recorded. 1. Righ

41 Troubleshooting 1. This chapter lists problems that might occur when setting up this product, and explains how to solve these problems. If you exp

42 Troubleshooting Problems When Installing Driver or Changing Settings ProblemPoints to check Action Installer won’t start upIs the CD-ROM correctly

43 Troubleshooting Installation does not finish successfully when you connect the SONAR V-STUDIO 100It may take between several tens of seconds and s

44 Troubleshooting Plug-ins are not installedThe plug-ins are not installed (registered) in the Start menu.The software synthesizers included with SO

45 Troubleshooting An error such as “Unknown Error in Sequencer.DLL” appearsSONAR was not installed correctly.Proceed as follows to re-install SONAR.

46 Troubleshooting No sound at allCould a message be indicating “Unable to Open Audio Playback Device”?If Media Player or another application that ha

47 Troubleshooting Problems with Recording ProblemPoints to check Action Can’t recordCould a message be indicating “Unable to open audio record devic

48 Troubleshooting Sound From the Device Connected to the Input Jacks is Not Loud EnoughAre the [MAIN MIX] knob, the level knobs for each input, and

49 Troubleshooting If data cannot be recorded while recording audio, or if data cannot be fully processed during playback, SONAR will automatically h

5 Troubleshooting ...41 Problems When Installing Driver or Changing Settings

50 Troubleshooting If problems occur more frequently with large (heavy) projects Increase the Mixing Latency Extremely short Mixing Latency settings

51 Appendix Changing or Viewing the Settings1. When changing driver settings, always make sure to first quit all applications using the SONAR V-STUDI

52 Appendix Changing or Viewing the Settings1. Use a USB cable to connect the SONAR V-STUDIO 100 hardware with your computer. 2. Turn the POWER switc

53 Appendix 1. Start up Windows with all USB cables disconnected (except those for a USB keyboard and/or USB mouse, if used). 2. Close all applicatio

54 Appendix 1. Start computer with all USB cables disconnected. (except the keyboard and mouse) 2. Double-click “VS100_Uninstaller.” 3. The display w

55 Appendix On Windows XP, if you omit making this setting, you may experience sound dropout. By making this setting you may be able to solve such pr

56 Appendix The SONAR V-STUDIO 100 hardware allows you to choose from the following sampling rates: 44,100 Hz, 48,000 Hz, and 96,000 Hz.* SONAR does

57 Appendix If the driver mode is set to ASIO, you won’t be able to adjust the Mixing Latency from SONAR. Adjust the “Audio Buffer Size” from the

58 Appendix In order to install SONAR, you must log on as a user who has administrative privileges.Once installed, SONAR can be used by any user (in

59 Appendix Shortcut reference TaskShortcut Switch tracksQuickly navigate tracks Hold down and turn Switch focus between tracks and buses + Change

6 Checking the Contents of the Package As soon as you open the package, check that you have all of the included items.If anything is missing, contact

60 Appendix Open Track viewOpen Console view + Return to zero (RTZ)RewindFast forwardGo to endStop playbackPlayRecordJump to next measure + Jump to

61 MEMO MEMOVS-100_install_e.book 61 ページ ２００９年３月１２日　木曜日　午後６時３分

62 MEMOVS-100_install_e.book 62 ページ ２００９年３月１２日　木曜日　午後６時３分

VS-100_install_e.book 63 ページ ２００９年３月１２日　木曜日　午後６時３分

* 5 1 0 0 0 0 6 4 1 1 - 0 1 *VS-100_install_e.book 64 ページ ２００９年３月１２日　木曜日　午後６時３分

7 Installation and Registration Here’s how to install the SONAR V-STUDIO 100 driver and SONAR on your computer. Please note before installing When in

8 Installation and Registration 1. Disconnect all USB cables (except those for a USB keyboard and/or USB mouse, if used), then start up Windows. 2. C

9 Installation and Registration 10. Perform the following procedure before you connect the SONAR V-STUIDO 100 hardware to your computer. 1. Minimize