Roland VC-2 Owner's Manual download pdf (Page 14)

Making connections

In order to use the VC-2, you’ll need to connect a mic and MIDI keyboard to the V-Synth XT as shown in the illustration

below.

Connect your mic to the front panel MIC jack.

Before you connect your mic, set the mic switch to the appropriate position for the type of mic you’re connecting.

• If your mic requires phantom power to be supplied via the XLR jack, use the “PHANTOM ON” setting.

• If your mic uses a phone plug or does not require phantom power, set the

MIC Switch

(p. 10) to the “NORMAL” setting.

* If you connect a mic, don’t select the “Hi-Z” setting of the MIC switch.

* The audio signal that is input from the MIC jack can be turned on/off by the

MIC Jack Switch

(p. 38). Be sure that this is turned on

when you’re using the mic.

MAIN

OUT

MIDI IN

INPUT L

OUT PUT

MIDI OUT

POWER

Microphone

MIC

Power amp

MIDI Keyboard

V-Synth XT (Front Panel)

V-Synth XT (Rear Panel)

to Power outlet

The “INPUT R”

jack is not used

with the VC-2.

If you’re playing a patch whose patch algorithm is Process Type 1 or Process

Type 2, connect an external audio source (e.g., keyboard or CD player) to the

V-Synth XT’s “INPUT L” jack, and input an audio signal.

vc2_for_XT_e1 14 ページ２００５年３月８日　火曜日　午後４時５２分

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 71 72

No comments

Roland VC-2 Owner's Manual Page 14