User’s Guide M-300 RCS Roland corporation and its affiliates assume no responsibility for any loss or damage (loss of profits, loss of data or other
10 Names of things and what they do fig.ScrRCSGuide.eps Basic screen area fig.ScrChDisp.eps This shows a screen of the same design as the screen of t
11 Names of things and what they doScreen recall buttons fig.ScrScreenAccess.eps These buttons switch the content of the basic screen area. The butto
12 Names of things and what they doFader layer buttons fig.ScrLayer.eps These buttons switch the layer operated by fader modules 1–16. The currently
13 Names of things and what they do fig.ScrRCSSOF.eps This panel is shown when SENDS ON FADER button is on. SENDS ON FADER Panel AUX SELECT 1–8Select
14 Names of things and what they do The mouse and keyboard are used to perform operations in M-300 RCS’s main screen area. • Up/down/left/right curso
15 Names of things and what they do ● New Project Opens a new project. ● Open Project... Opens an existing project (a project that was saved to USB m
16 Using M-300 RCS Opening a new project 1 From the “File” menu, choose “New Project.” A message box will appear, asking you to confirm whether you w
17 Using M-300 RCSSaving a project under its current name (Overwrite) 1 From the “File” menu, choose “Save Project.” The project will be saved under
18 Using M-300 RCS 1 Click the ONLINE button. fig.ScrOffline.epsfig.ScrSync1.eps The “Synchronize” dialog box will appear. 2 In the “Project” field,
19 Using M-300 RCS If you selected “Send to CONSOLE” in step 2, a message box will ask you to confirm the project synchronization. fig.ScrSyncConfirm
2
20 Using M-300 RCS 1 Click the ONLINE button. fig.ScrOnline.eps 2 M-300 RCS will switch to offline mode. fig.ScrOffline.eps Switching to offline mode
21Using M-300 RCSIn offline mode, you can make virtual settings for an input/output unit (e.g., S-1608 stage unit, S-0816 FOH unit, S-4000S 40-channe
22Using M-300 RCSIf you choose S-4000S in the REAC Config dialog box, a 32-in/8-out configuration will be applied. To change the S-4000S module config
23Using M-300 RCS1From the “Setup” menu, choose “Initialize.”fig.ScrInit.epsThe “Initialize” dialog box will appear.2Place a check mark in the section
24Using M-300 RCSHere’s how to make preference settings within M-300 RCS. The settings you make here will not be reflected in the M-300 console.1From
25Using M-300 RCS● Main FaderIf you select “SENDS ON FADER MASTER”, the MAIN fader module becomes the send-destination AUX/MTX fader, while the SENDS
26Using M-300 RCS1From the “Setup” menu, choose “System Setup...”fig.ScrLCRSetup.epsThe “System Setup” dialog box will appear.2Select the desired item
27Using M-300 RCSYou can manage and make settings for the M-48 Live Personal Mixer in the same way you do from the M-300 console.M-300 RCS cannot use
28Offline modefig.OfflineEdit.epsOffline mode lets you edit M-300 project files when you don’t have an M-300 console at hand. A project file you’ve ed
29Offline mode4Edit the project.If necessary, use the “Reac Config” dialog box to make REAC input/output configuration settings.5Save the project file
3 Contents Contents ...3Introduction ...
30fig.OnlineEdit.epsOnline mode lets you remotely control the M-300 console from M-300 RCS. Level meter data from the M-300 console and operations per
31Online mode2Start up M-300 RCS.fig.ScrRCS.epsA new project will open.3If necessary, open an existing project file.4Click the “ONLINE” button to begi
32AppendixWarning/error messages shown in the basic screen area are the same as on the M-300 console. For details on warning/error messages, refer to
4 Introduction M-300 RCS is application software that runs on Microsoft ® Windows XP, Microsoft Windows Vista, or Microsoft Windows 7. It lets you e
5 Introduction M-300 RCS has two modes: Offline mode and Online mode. Offline mode In this mode you can edit an M-300 project file via USB memory. Th
6 Introduction * This software has been found to work on typical computers that meet the above requirements, but we do not guarantee that it will ope
7 Introduction . In order to remotely control the M-300 console from M-300 RCS, you’ll need to connect the M-300 to your computer using a USB cable.U
8 Introduction 4 Press [F2 (USB MIDI)] to access the USB MIDI tab. fig.ScrM4SysRemUSB.eps 5 In the RECEIVE section, select the “Sys Ex” button. fig.S
9 Starting and exiting the application 1 In the “M-300 RCS” folder, double-click “M-300 RCS.exe”. fig.IconRCS.epsfig.ScrRCS.eps The application will
Comments to this Manuals