1
About the Wireless LAN Function
Check the version
The wireless LAN function was added in INTEGRA-7 version
1.10. If the version is earlier than 1.10, download the update
from the support page (http://www.roland.com/support/)
g Downloads g product name (INTEGRA-7) g INTEGRA-7
System Program, and update your INTEGRA-7.
* If this supplementary manual was included with a new
INTEGRA-7 you purchased, your instrument has already been
updated to version 1.10 or later; you do not need to update.
How to check the version
Select the [MENU] button g “SYSTEM” g “VERSION.”
What is Wireless LAN Function?
By inserting the wireless USB Adapter (WNA1100-RL; sold separately)
into the INTEGRA-7’s USB MEMORY port, you’ll be able to use
wireless-compatible applications (such as the “INTEGRA-7 Editor”
iPad app).
INTEGRA-7
Wireless USB Adapter (sold
separately: WNA1100-RL)
Wireless LAN access point
(e.g., wireless LAN router)
Wireless LAN Wireless LAN
iPad etc.
Items required to use the wireless LAN function
Wireless USB Adapter (sold separately: WNA1100-RL)
Wireless LAN access point (e.g., wireless LAN router) *1 *2 *3
iPad etc.
*1 The wireless LAN access point you use must support WPS. If your
wireless LAN access point does not support WPS, you can connect
using the procedure described in “Connecting to a Wireless LAN
Access Point That You Select (SELECT ACCESS POINT)” (p. 2).
*2 The ability to connect with all kinds of wireless LAN access points
is not guaranteed.
*3 If you’re unable to connect to the wireless LAN access point, try
connecting using Ad-Hoc mode (p. 3).
Basic Connection Method (Connect by
WPS)
The rst time you connect the INTEGRA-7 to a wireless network,
you’ll need to perform the following procedure (WPS) to join the
wireless network.
This procedure is required only the rst time. (Once you’ve joined the
network, this procedure will no longer be necessary.)
What is WPS?
This is a standard that makes it easy to make security settings
when connecting to a wireless LAN access point. We recommend
that you use WPS when connecting to a wireless LAN access point.
1. Turn OFF the INTEGRA-7.
2. Insert the wireless USB Adapter (WNA1100-RL; sold
separately) into the INTEGRA-7’s USB MEMORY port.
3. Hold down the [VOLUME] (PREVIEW) knob and turn ON
the INTEGRA-7. When the WPS screen appears in the
INTEGRA-7’s display, release the [VOLUME] (PREVIEW) knob.
4. Perform the WPS operation on your wireless LAN access
point (e.g., hold down the WPS button on your wireless
LAN access point).
For details on WPS operation of your wireless LAN access point, refer
to the documentation for your wireless LAN access point.
5. Use the cursor buttons to select the [OK], then press the
[ENTER] button.
Once successfully connected, the status (WIRELESS STATUS) screen
(p. 2) will appear.
6. Press the [EXIT] button to return to the top screen.
You can use the wireless connection from an iPad app such as
INTEGRA-7 Editor.
NOTE
* The device (e.g., iPad) running the app must be connected to the
same network.
MEMO
• The connection data is stored in memory when you perform
the WPS procedure; the device will automatically connect to the
wireless network the next time.
• All connection data will be erased if you perform a factory reset.
* Connection data is not included in a backup saved in the USB
ash drive.
Icons in the display
The wireless LAN status is shown in the upper part of the
display.
Icon Explanation
Currently connected to the wireless LAN access point.
Three bars are used to indicate the signal level (the
strength of the connected wireless LAN access point’s
radio signal).
The wireless USB adapter is inserted, but not connected
with a wireless LAN access point.
The wireless USB adapter is not inserted (nothing is
displayed).
Ad-Hoc mode (p. 3).
INTEGRA-7
* 5 1 0 0 0 3 2 3 7 4 - 0 2 *
(15 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals