Roland ADA-7000 Owner's Manual download pdf (Page 18)

Supplementary Notes

How to connect the VM-3100Pro and

the ADA-7000

Connection

Connect the VM-3100Pro and the ADA-7000 with the R-BUS cable attached in the ADA-7000 box.

Booting up

Turn the power on the ADA-7000 first, then VM-3100Pro.

Sampling clock setting

If clock source has not been set, noise may be generated from the audio output on the ADA-7000 and the VM-

3100Pro. While setting the clock source, please turn down the master and monitor level, and turn up again after the

setting is finished. Set the sampling clock of the ADA-7000 and the VM-3100Pro as follows.

Clock Source on the ADA-7000: R-BUS

Master clock on the VM-3100Pro: INTERNAL

ADA-7000 setting

Check if the clock source on the ADA-7000 is set to R-BUS. When the ADA-7000 is booted up, the clock source is set

to R-BUS.

* Refer to ADA-7000 Owner’s Manual p. 6 “Clock source.”

VM-3100Pro setting

Set the master clock of the VM-3100Pro to INTERNAL as follows.

1. Hold down [SHIFT], and press [DIGITAL IN].

2. Press [F1 (→INT)].

* Sample rate of the VM-3100Pro is fixed to 44.1kHz. If you use the VM-3100Pro and the ADA-7000 in combination,

the ADA-7000 works in 44.1kHz sample rate.

* If you set the clock source differently, please refer to the

ADA-7000 Owner’s Manual p. 6 “Clock source” and the

VM-3100Pro Owner’s Manual p. 52 “Inputting signals from digital devices.”

How to connect the VSR-880 and the ADA-7000

Connection

Connect the VSR-880 and the ADA-7000 with the R-BUS cable attached in the ADA-7000 box.

Booting up

Turn the power on the ADA-7000 first, then VSR-880.

Sampling clock setting

Set the sampling clock of the ADA-7000 and the VSR-880 as follows. If clock source has not been set, noise may be

generated from the audio output on the ADA-7000 and the VSR-880. While setting the clock source, please turn

down the master and monitor level, and turn up again after the setting is finished.

Clock Source on the ADA-7000: R-BUS

Master clock on the VSR-880: INTERNAL

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

No comments

Roland ADA-7000 Owner's Manual Page 18