Roland MOBILE CUBE Owner's Manual download pdf (Page 7)

Español Italiano Français Deutsch EnglishPortuguêsNederlands

Panel Descriptions

3. VOLUME Knob

This adjusts the volume of the device

connected to the Keyboard/ Instrument/

Guitar input jack(s).

4. CHORUS Switch

Pressing the CHORUS switch will turn on the

chorus effect.

The MOBILE CUBE’s chorus effect is

a spatially synthesized chorus that takes

advantage of stereo playback to generate

an expansive sensation.

What’s spatially synthesized chorus

With spatially synthesized chorus,

a method available only in stereo, the

chorus effect is created by taking the

sound from the right speaker (from which

the effect sound is output), and the sound

from the left speaker (which outputs the

direct sound), and then mixing them in the

actual space. This creates a greater lateral

spread than that produced when the

sounds are mixed electronically,

providing a more natural sense of breadth.

AUX

5. CENTER CANCEL Switch

Pressing the CENTER CANCEL switch will

eliminate sounds (such as vocals or guitar

solos) located in the center of the stereo

source from the music CD or other device

connected to AUX IN. This is convenient

when you want to use the source for karaoke

or for guitar practice.

* For some stereo sources, it may not be possible to obtain

a sufficient cancellation effect.

TONE and DELAY/REVERB

* The effect applies only to the device connected to MIC and

to the KEYBOARD/ INSTRUMENT/ GUITAR input

jacks.

6. TONE Knob

This adjusts the tone. Turn the knob

clockwise for a brighter tone; to get a milder

tone, turn the knob counterclockwise.

7. DELAY/REVERB Knob

Turn this knob to DELAY or REVERB to

switch to that effect. Turn the knob to adjust

the amount of effect applied.

DELAY

Turn the knob to change the time and amount

of delay effects.

What’s DELAY

A delay is a little bit like an echo, and by

repeating the original sound after it is played,

this effect can add a sense of spaciousness

and depth to the sound. In addition, when

this effect is applied to instruments that play

melodies, it can make their performance

sound smoother or can add an extra bounce

to their rhythm.

REVERB (Stereo REVERB)

Spacious-sounding stereo reverb is provided.

Turn the knob to adjust the reverb level.

What’s REVERB

By adding reverberation to a sound, this

effect imbues the sound with a sense of

spaciousness and depth.

8. Power Indicator

This indicator lights when the unit is turned on.

* When operating on battery power only, the unit’s indicator

will become dim during play when battery power gets too

low.

* Sounds may distort easily or may cut off when played at

high volume as the battery power begins to fade, but this is

normal and does not indicate a malfunction.

In such instances, either replace the batteries or use the AC

adaptor (sold separately).

MOBILE_CUBE_egfiepn.book Page 7 Wednesday, March 5, 2008 10:35 AM

1 2 3 4 5 6 7 8 9 10 11 12 ... 63 64

Comments to this Manuals

No comments

Roland MOBILE CUBE Owner's Manual Page 7

Comments to this Manuals

Related products and manuals for Audio amplifiers Roland MOBILE CUBE