20
OPERATION
6. Use the SENS knobs to adjust input sensitivity for each channel.
* For minimum noise and/or distortion, set the levels so the OVERLOAD indicators
light only briefly on input peaks.
fig.9e
7. Adjust the L/R input balance of each channel using the BALANCE knobs.
8. Adjust the channel levels relative to one another using the Channel VOLUME
sliders.
9. Set the overall output volume using the MASTER slider.
* Use a monaural mic, and connect the mic to channel 1
(MIC) or 3 (MIC).
On the channel to which the mic is connected, turn the
sensitivity knob all the way to the right.
Comments to this Manuals