Roland Octa-Capture User Manual download pdf (Page 9)

Version 1.5 Functions

Multi-Monitor button

If you click the [Multi-Monitor] button, you’ll be able to independently control the four direct mixers A–D.

Direct mixers A--D will output directly to OUTPUTs 1–8.

Choose this setting if you want to output to four separate monitor systems (p. 19).

Patch Bay

OUTPUT 1-2

OUTPUT 3-4

OUTPUT 5-6

OUTPUT 7-8

OUTPUT 9-10

Direct Mixer A

WAVE OUT 1-2

3-4

5-6

7-8

9-10

Output Jacks 1–2

/Headphone Jack

Output Jacks 3–8

COAXIAL output jack

9-10

Device panel

Here you can view the status of the OCTA-CAPTURE’s settings.

Item Explanation

Selects which unit’s mixer will be shown when two OCTA-CAPTURE units are connected.

When you click this button, the display of the OCTA-CAPTURE unit itself will be highlighted.

SAMPLE RATE Indicates/Sets the sampling frequency.

CLOCK

Indicates the clock source.

INTERNAL: The OCTA-CAPTURE’s internal clock is used.

EXTERNAL: The OCTA-CAPTURE is operating in synchronization with the digital signal being input to INPUT jack 9/10.

Setting the sampling rate

The sampling rate setting of the OCTA-CAPTURE automatically changes to match the rate of the audio data that is played, or the rate that your DAW

software is set to when recording.

You can also change the sampling rate of the OCTA-CAPTURE manually.

Click of the SAMPLE RATE, then select another sampling rate.

In this case, you may also need to change the sampling rate of the DAW software.

* The sampling rate cannot be changed during playback or recording, or when equipment is connected to the COAXIAL IN (9/10) jack.

* When the sampling rate is switched, a small pop noise may be heard, but this does not indicate a malfunction.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 22 23

No comments

Roland Octa-Capture User Manual Page 9