Roland GRAND Owner's Manual download pdf (Page 62)

Chapter 3. Performance

■ Adjusting the Sound to Achieve the Preferred

Tone Quality (Equalizer)

The RG-3 features a built-in, three-band digital equalizer.

An equalizer boosts or cuts specific sound pitches (frequency ranges) to

adjust the sound balance for the overall performance.

For example, you can boost the highs to get a crisper sound, or boost the low

end for a more powerful sound.

You can also adjust the sound to compensate for the acoustical

characteristics of the performance space.

If raising the values for separate frequencies causes the sound to distort, you

can use the “Master Level” (see below) to control such distortion.

Press the [Function] (Exit) button, getting its indicator to light.

Press the [Song] (Select -) button or [ ] (Select +) button to

display the EQUALIZER screen.

fig.03-151d

Press the [Song] (Select -) button or [ ] (Select +) button so that

the value for the range you want to set is flashing.

fig.03-152d

Press the [ ] (Value -) button or [ ] (Value +) button to

adjust the range and the overall level.

Value: -60–0–+60

Press the [Function] (Exit) button so the indicator goes out.

Value Description

Master

(Master Level)

You can temper the distortion in the sound by lowering the level.

Raising the level too much may cause the sound to become dis-

torted.

L (Low)

Low-frequency range.

This is the range of frequencies for instruments like drums, bass,

organ, guitar and strings.

M (Middle)

Midrange.

This is the range of frequencies where most instrument sounds

are concentrated.

H (High)

High-frequency range.

These frequencies add brilliance to the sound.

You can save this setting in

the RG-3’s memory using the

Memory Backup function

(p. 73).

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 123 124

Comments to this Manuals

No comments

Roland GRAND Owner's Manual Page 62

Comments to this Manuals

Related products and manuals for Digital pianos Roland GRAND