Roland G6037008-01 Owner's Manual download pdf (Page 4)

S-4000S-0832

S-4000S-MR

The 40Ch I/O modular rack

configured to be used at the Front

of House position for connection

to mixing console with ordinary

XLR cables. This configuration

would be used with an

S-4000S-3208 at the stage position.

Modular rack chassis with no

pre-installed In/Out modules.

Designed for custom

configurations such as 24x16 and

40x0.

SI-AD4

Analog

Input Module

SO-DA4

Analog

Output Module

SI-AES4

AES/EBU

Input Module

Four-channel AES/EBU input and output modules

with Sample Frequency Rate conversion

SO-AES4

AES/EBU

Output Module

*Input and Output Modules are not user

installable. Installation must be carried out by an

authorized Roland Service Technician.

Digital Input/Output Modules

Analog Input/Output Modules

Input/Output ModulesOptional Configurations for S-4000S

S-4000 Digital Snake System

Analog Input Modules

On board 24bit/96kHz AD converters and

high quality mic pre-amps with phantom

power supply.

Analog Output Modules

On board 24bit/96kHz

DA converters.

Input Channel Indicator

This indicates Signal, Clip and On/Off status of

the phantom power for each input channel. The

status of the input channels can be checked even

from the stage.

REAC Module

Redundant REAC transfer provides

continuation of audio transmission

even in case of accidental damage

of one cable.

MIDI terminals

MIDI is transferred down the snake

from both the In and Out MIDI

connectors. These enable the remote

control of mixers or musical

instruments from external MIDI

devices at the stage or FOH positions.

Mode Selection Switch REMOTE terminal (RS-232C)

Connection for either the dedicated

remote controller (S-4000R) or a

computer installed with the remote

control software (S-4000RCS*).

Power Inlets

The Locking Arm is equipped to

prevent accidental unplugging of

the power cord. The DC power

supply connection is provided for

use with an optional redundant

power supply in case of power

supply failure.

Mute All Outputs button

When this button is pressed and held,

all Outputs in the S-4000 system will be

muted. This is convenient for changing

cable connections.

Cooling fans x 3

Internal heat is exhausted using 3

fans on the rear panel reducing the

operational noise of the fans.

This unit has 32 inputs + 8 outputs and is typically installed at

stage side. The AD/DA conversion is 24bit/96kHz. High quality

XR-1 pre-amps are provided for each input channel, which can

accept both mic and line level inputs, eliminating the need for

direct boxes. Phantom power and an input PAD is available for

each channel.

Master

Outputs source audio to the Slave and Split devices

It receives Input from the Slave device.

Slave

Split

Receives Input from and sends output to the Master

device.

Receives Input from all of the Master device’s sources.

* S-4000RCS software is free and can be

downloaded from www.rssamerica.com.

Mix Magazine

Certiﬁ ed Hit

EDIROL Video Equipment

RSS Digital Snake Systems

S-4000S-3208

40CH I/O Modular Rack

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Roland G6037008-01 Owner's Manual Page 4

Comments to this Manuals

Related products and manuals for Music Pedal Roland G6037008-01