Roland BK-7m Owner's Manual Page 51

  • Download
  • Add to my manuals
  • Print
  • Page
    / 128
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 50
‘Performance Edit’ parameters
Backing Module BK-7m
r
51
‘Tone Part View’ parameters
This function group can be selected using [MENU] but-
ton ‰ “Performance Edit” ‰ “Tone Part View”.
1.
Use the [CURSOR÷VALUE] dial to select the
real-time part you want to edit (MBS, LWR,
UP2, UP1).
The display shows the settings for the selected real-
time part.
2.
Use the dial to select and set the desired
parameter(s).
The following parameters are available:
Families
Allows you to select a different Tone family. See
page 91 for a list of available Tones and Drum Sets.
After selecting a new family, you can press the
[CURSOR÷VALUE] dial and then rotate it to select a
Tone from that family.
Tone
Allows you to select a different Tone within the
active Tone family. See page 91 for a list of available
Tones and Drum Sets.
While selecting a Tone, you can press the
[CURSOR÷VALUE] dial and then rotate it to select a
different family.
Volume
Adjusts the volume of the selected real-time part.
Selecting “0” means that the part is question is no
longer audible.
Reverb Send
Use this parameter to set the reverb send level (i.e.
the amount of effect that should be added).
Chorus Send
Use this parameter to set the chorus send level (i.e.
the amount of effect that should be added).
Panpot
Use this parameter to change the stereo placement
of the selected real-time part. “L63” means “hard left”
and “R63” represents “hard right”. Choose “0” if the
sound should be at the center of the stereo image.
EQ Part Edit
1.
If you also want to edit the parameters of
equalizer, you have to press
[CURSOR÷VALUE] dial to select the “EQ Edit
Part” page.
2.
Use the dial to select and set the desired
parameter(s).
The following parameters are available:
Save As Default This function allows you to save all “Per-
formance Edit” settings as the new
defaults that will be loaded each time
you switch on the BK-7m.
Parameter Explanation
Families The BK-7m’s Tones are grouped into 16
families: Piano, guitar, bass, strings, etc.
Parameter Explanation
Tone The number of Tones depends on the
selected family.
Parameter Setting
Volume 0~127
Parameter/Group Explanation
Parameter Setting
Reverb Send 0~127
Parameter Setting
Chorus Send 0~127
Parameter Setting
Panpot L63~0~R63
Parameter Setting range Explanation
Switch Off, On This parameter allows
you to switch the
equalizer on and off.
High Freq 1500Hz, 2000Hz,
3000Hz, 4000Hz,
6000Hz, 8000Hz,
12000Hz
Allows you to set the
cutoff frequency of
the high band (this is
a shelving filter).
High Gain –15~+15dB Use this parameter to
set the level of the
selected “High” fre-
quency. Positive val-
ues boost (increase
the volume of) that
frequency band, neg-
ative values cut
(attenuate) it.
Mid Freq 200~8000Hz Allows you to set the
cutoff frequency of
the middle band (this
is a peaking filter).
BK-7m_UK.book Page 51 Tuesday, January 4, 2011 9:25 AM
Page view 50
1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 127 128

Comments to this Manuals

No comments