Roland BK-7m Owner's Manual download pdf (Page 59)

‘Performance Edit’ parameters

Backing Module BK-7m

‘Style Parts’ parameters

This function group can be selected using [MENU] but-

ton ‰ “Performance Edit” ‰ “Style Parts”.

The parameters of this function group apply to the eight

Arranger parts (i.e. the parts used to play back the

selected Music Style).

Use the [CURSOR÷VALUE] dial to select the

Music Style part you want to edit (ADrum,

ABass, Acc1, Acc2, Acc3, Acc4, Acc4, Acc5,

Acc6).

The display shows the settings for the selected part.

Use the dial to select and set the desired

parameter(s)

The following parameters are available:

Mute

Allows you to mute the selected part, so that it is no

longer audible.

Solo

Allows you to solo the selected part, which means

that all other Music Style parts are switched off.

Volume

Adjusts the volume of the selected Music Style part.

Selecting “0” means that the part is question is no

longer audible.

Exp. Pedal

Select “Off” if you don’t need pedal expression for the

selected part. This means that the Music Style part in

question no longer responds to an expression pedal

you may have connected to the SWITCH/EXPRESSION

socket.

Exp. Pedal All Parts On

If you are not sure which Music Style parts still

receive expression messages, and if you want all to

receive them, you can select this field and press the

[CURSOR÷VALUE] dial.

Exp. Pedal All Parts Off

If you are not sure which Music Style parts still

receive expression messages, and if no Music Style

part should receive them, you can select this field

and press the [CURSOR÷VALUE] dial.

Split

This page allows you to set two keyboard-related

parameters. It can be selected using [MENU] button ‰

“Performance Edit” ‰ “Split”.

Split Point

The “Split Point” parameter allows you to set the split

point.

Lower Hold

This parameter allows you to set the Hold function

for the LWR part.

If you set this parameter to “On”, the notes of the

LWR part go on sounding until you play other notes

in the left keyboard area. (This function is only avail-

able while the [SPLIT] button lights.)

If you select “Off”, the LWR part stops sounding as

soon as you release all keys in the left area.

Key

This function allows you to transpose the BK-7m’s pitch

in semi-tone steps. Depending on the mode setting, this

transposition applies to all sections or just a specific sec-

tion. It can be selected using [MENU] button ‰ “Perfor-

mance Edit” ‰ “Key” or by pressing the [KEY] button. See

“Changing the key” on p. 37.

C Feedback –98~+98% Adjusts the proportion

of the delay sound that

is fed back into the

effect. Negative (–)

settings invert the

phase.

R Delay Sync See “L Delay Sync”

R Delay msec See “L Delay msec”

R Delay Note See “L Delay Note”

R Level See “L Level”

Parameter Setting

Mute Off, On

Parameter Explanation

Solo Off, On

Parameter Setting

Volume 0~127

Parameter Setting Explanation

Parameter Setting

Exp. Pedal Off, On

Parameter Setting

Split Point B1~B6

Parameter Setting

Lower Hold Off, On

BK-7m_UK.book Page 59 Tuesday, January 4, 2011 9:25 AM

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 127 128

Comments to this Manuals

No comments

Roland BK-7m Owner's Manual Page 59

Comments to this Manuals

Related products and manuals for Musical Equipment Roland BK-7m