Roland Atelier AT-90SL User Manual download pdf (Page 18)

<Example1> Setting REVERB MACRO to ROOM 3 (GS Part)

According to the “Parameter Address Map,” the REVERB MACRO Address is 40 01 30H,

and ROOM 3 is a value of 02H. Thus,

F0 41 10 42 12 40 01 30 02 ?? F7

(1) (2) (3) (4) (5) Address data Checksum (6)

(1) Exclusive Status, (2) ID (Roland), (3) Device ID (17), (4) Model ID (GS),

(5) Command ID (DT1), (6) End of Exclusive

Next we calculate the checksum.

40H + 01H + 30H + 02H = 64 + 1 + 48 + 2 = 115 (sum)

115 (sum) / 128 = 0 (quotient) ... 115 (remainder)

checksum = 128 - 115 (remainder) = 13 = 0DH

This means that F0 41 10 42 12 40 01 30 02 0D F7 is the message we transmit.

With “Grand Piano” set as the tone for the Upper Orchestral part

* Keyboard part tone settings are enabled when MIDI IN Mode is set to MODE 2.

According to the “Parameter Address Map,” since the address for the tone number in the

upper part information for the part parameter [Keyboard Part] is 01 0p 01H and the

Orchestral Part Offset Value is p = 3, the address is then 01 03 01H. Since the tone map

(Keyboard part) (p. 18) gives TONE NUMBER = 38H, BANK SELECT MSB = 02H, BANK

SELECT LSB = 00H for the “Grand Piano” tone number, (we get the following):

FO 41 10 62 12 01 03 01 38 02 00 ?? F7

(1) (2) (3) (4) (5) Address data Checksum (6)

(1) Exclusive Status, (2) ID (Roland), (3) Device ID (17), (4) Model ID (Atelier), (5) Command

ID (DT1), (6) End of Exclusive

Next we calculate the checksum.

01H + 03H + 01H + 38H + 02 + 00H = 1 + 3 + 1 + 56 + 2 + 0 = 63 (sum)

63 (sum) / 128 = 0 (quotient) ... 63 (remainder)

checksum = 128 - 63 (remainder) = 65 = 41H

This means that F0 41 10 62 12 01 03 01 38 02 00 41 F7 is the message we transmit.

●About tuning

In MIDI, individual Parts are tuned by sending RPN #1 (Master Fine Tuning) to the

appropriate MIDI channel.

In MIDI, an entire device is tuned by either sending RPN #1 to all MIDI channels being

used, or by sending a System Exclusive MASTER TUNE (address 40 00 00H).

RPN #1 allows tuning to be specified in steps of approximately 0.012 cents (to be precise,

100/8192 cent), and System Exclusive MASTER TUNE allows tuning in steps of 0.1 cent.

One cent is 1/100th of a semitone.

The values of RPN #1 (Master Fine Tuning) and System Exclusive MASTER TUNE are

added together to determine the actual pitch sounded by each Part.

Frequently used tuning values are given in the following table for your reference. Values

are in hexadecimal (decimal in parentheses).

+————————+————————+——————————————+———————————————————————+

+————————+————————+——————————————+———————————————————————+

| 445.0 | +19.56 | 4C 43 (+1603)| 00 04 0C 04 (+196)|

| 444.0 | +15.67 | 4A 03 (+1283)| 00 04 09 0D (+157)|

| 443.0 | +11.76 | 47 44 (+ 964)| 00 04 07 06 (+118)|

| 442.0 | + 7.85 | 45 03 (+ 643)| 00 04 04 0F (+ 79)|

| 441.0 | + 3.93 | 42 42 (+ 322)| 00 04 02 07 (+ 39)|

| 440.0 | 0.00 | 40 00 ( 0)| 00 04 00 00 ( 0)|

| 439.0 | — 3.94 | 3D 3D (— 323)| 00 03 0D 09 (— 39)|

| 438.0 | — 7.89 | 3A 7A (— 646)| 00 03 0B 01 (— 79)|

+————————+————————+——————————————+———————————————————————+

<Example> Set the tuning of MIDI channel 3 to A4 = 442.0 Hz

Send RPN#1 to MIDI channel 3. From the above table, the value is 45 03H.

B2 64 00 MIDI ch.3, lower byte of RPN parameter number: 00H

(B2) 65 01 (MIDI ch.3) upper byte of RPN parameter number: 01H

(B2) 06 45 (MIDI ch.3) upper byte of parameter value: 45H

(B2) 26 03 (MIDI ch.3) lower byte of parameter value: 03H

(B2) 64 7F (MIDI ch.3) lower byte of RPN parameter number: 7FH

(B2) 65 7F (MIDI ch.3) upper byte of RPN parameter number: 7FH

7. Tone List

●Tone List (Keyboard Part)

* Program Change messages cannot be used to make these changes. Make the settings

using the System Exclusive messages Individual Parameter and Part Parameter

[Keyboard Part: Model ID = 62H] (p. 11). Refer to the example of the Grand Piano tone in

the Upper Orchestral Part in 6. Reference “How to Calculate the Checksum” <Example

2>.

TONE

NUMBER

BANK

SELECT MSB

BANK

SELECT LSB

VOICE NAME

00H 00H 00H Full Organ1

02H 00H 00H Full Organ2

04H 00H 00H Full Organ3

01H 00H 00H Full Organ4

03H 00H 00H Full Organ5

05H 00H 00H Full Organ6

20H 00H 00H Full Organ7

20H 01H 00H Full Organ8

20H 02H 00H Full Organ9

00H 01H 00H Ballad Organ

00H 02H 00H GoodOldOrgan

06H 00H 00H Jazz Organ1

08H 00H 00H Jazz Organ2

0AH 00H 00H Jazz Organ3

07H 00H 00H Jazz Organ4

09H 00H 00H Jazz Organ5

0BH 00H 00H Jazz Organ6

06H 01H 00H ComboJazzOrg

06H 02H 00H LightJazzOrg

0CH 00H 00H Rock Organ1

0DH 00H 00H Rock Organ2

0EH 00H 00H Lower Organ1

10H 00H 00H Lower Organ2

12H 00H 00H Lower Organ3

0FH 00H 00H Lower Organ4

11H 00H 00H Lower Organ5

13H 00H 00H Lower Organ6

0EH 01H 00H Manual Bass

14H 00H 00H Pipe Organ1

16H 00H 00H Pipe Organ2

18H 00H 00H Pipe Organ3

15H 00H 00H Pipe Organ4

17H 00H 00H Pipe Organ5

19H 00H 00H Pipe Organ6

21H 00H 00H Pipe Organ7

16H 01H 00H AEx Pipe Mix

15H 01H 00H AEx PipeOrg

14H 02H 00H Diapason 8'

14H 01H 00H FluteCeleste

21H 01H 00H Gemshorn 8'

21H 02H 00H Trompet 8'

21H 03H 00H Hautbois 8'

21H 04H 00H Viola 8'

21H 05H 00H ViolaCeleste

21H 06H 00H Bombarde16'

22H 0AH 00H T.ViolCelest

22H 01H 00H T.String 8'

22H 0BH 00H T.Vox Humana

22H 02H 00H VoxHumana 8'

22H 03H 00H T.Tuba 8'

22H 04H 00H T.Trumpet 8'

22H 05H 00H T.Sax 8'

22H 06H 00H T.Oboe 8'

22H 09H 00H T.Kinura 8'

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 29 30

Comments to this Manuals

No comments

Roland Atelier AT-90SL User Manual Page 18

Comments to this Manuals

Related products and manuals for Musical Instruments Roland Atelier AT-90SL