Roland KF-7 Owner's Manual download pdf (Page 18)

Before You Play

Connecting a Microphone

You can connect a microphone into the Mic In jack, and enjoy

karaoke with the KF-90.

fig.00-09

1. Connect a microphone to the Mic In jack on the

back of the instrument.

2. Rotate the [Mic Volume] knob next to the Mic In

jack to adjust the volume level for the

microphone.

→ You can use a microphone (sold separately). When purchasing

a microphone, please consult the vendor where you bought the

KF-90.

Some Notes on Using a Microphone

• Be careful of high volume levels when using mikes late

at night or early in the morning.

• When connecting a microphone to the KF-90, be sure to

lower the volume. If the volume control is too high when

the microphone is plugged in, noise may be produced by

the speakers.

• Howling could be produced depending on the location

of microphones relative to speakers. This can be

remedied by:

• Changing the orientation of the microphone.

• Relocating microphone at a greater distance from

speakers.

• Lowering volume levels.

About the Touch Screen

The KF-90 makes use of a Touch Screen. This lets you carry

out a wide variety of actions just by touching the screen.

fig.00-10.j

Immediately after the power is turned on, this screen

appears. For more detailed information, refer to p. 50.

* The Touch Screen is operated by touching it with your finger.

Pressing hard, or using a hard object can damage the Touch

Screen. Be careful not to press too hard, and be sure to use only

your fingers to operate the Touch Screen.

* The positioning of the Touch Screen may become displaced due

to changes in the surrounding environment and over time. If

this happens, follow the steps in “Repositioning the Touch

Screen” (p. 155) to correct the pointer position.

* Do not place items on the touch panel.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 195 196

No comments

Roland KF-7 Owner's Manual Page 18