Roland CJ-540 Specifications download pdf (Page 29)

Part 4: Contour Cutting

4-3 Operation Using Print-and-Cut Devices

Printing and Cutting

After the image is printed, the media is automatically rolled back and cut out. Follow the procedure below when printing

and cutting on one device.

PROCEDURE

Click the [Print] menu and click the [Configura-

tion] tab. Then click [Properties] and click [Cut-

ter].

Check the [Enable Cutter] box, set up the cut-

ting condition. Then click [OK].

Click [OK] to exit the [Print] screen.

From the [Option] menu, click [Cutting] and

check the [Process Cutting Paths] or the [Out-

line Jobs] box. You can also check both boxes

at the same time. Click [OK].

Open the image file and perform RIP'ing and

printing.

Cutting after Lamination

Printing crop marks for alignment and using them lets you remove media after printing, then load it again and perform

cutting, positioning it accurately. In this case, only printing is performed first and then only cutting is performed after

reloading the media.

PROCEDURE

Click the [Print] menu and click the [Configura-

tion] tab. Check the [Cutting Registration Marks]

box.

Click [Properties] and click [Cutter] tab. Clear

the [Enable Cutter] box then click [OK].

Click [OK].

1 2 ... 24 25 26 27 28 29 30 31 32

No comments

Roland CJ-540 Specifications Page 29