Roland RA-640 Specifications download pdf (Page 33)

5. What to do if...

The take-up unit doesn't take up media.

Are the power cord and AC adapter connected correctly?

Connect securely, so that the connection will not come loose or be incomplete.

Is the AUTO switch set to [OFF]?

Set the AUTO switch to match the direction of take-up.

Is the setting for the AUTO switch at the correct position?

Orient the setting of the AUTO switch to match the direction of take-up for the media.

Is automatic cutoff of the media being performed?

Take-up quits as soon as the media is cut o. On the computer (the software RIP), make the setting so that the printer doesn't

perform automatic cuto. For more information about the setting for automatic cuto, refer to the documentation for the

software RIP.

Is the paper tube installed correctly?

Securely insert the paper tube onto the end caps. If the paper tube is not attached correctly, it may spin without traction

and fail to take up the media.



P.20, “3. Assembling and Installing Procedure 3.- ”

Is the paper tube bent or sagging?

Media cannot be taken up smoothly when the paper tube is bent or sagging.

Are you using the included paper tube?

For the paper tube, use the included item. Using something other than the included item may result in spinning without

traction or other problems that impede media take-up.



P. 22, “About the Paper Tube”

Media take-up is not straight.

Is the media loaded correctly?

Remove the media, then redo media loading from the beginning.

1 2 ... 28 29 30 31 32 33 34 35 36

No comments

Roland RA-640 Specifications Page 33