Roland RA-640 Specifications download pdf (Page 43)

7. Network Settings



Press .



Repeat



and



to set the subnet mask.

When you've nished making the setting, press

If you’re using one computer and one machine, go on to

. If setting a gateway address is required, go

on to

Set the gateway address.



Press .

The screen shown in the gure appears again.



Press .

Press

twice.



Use to select the address number.

[GATEWAY ADDR.]: 255.255.255.255

For the value to enter for the gateway address, consult your network administrator.

Here, "255.255.255.255" is entered by way of example.



Press .



Repeat



and



to set the gateway address numbers.

When you've nished making the setting, press

Finish making the settings.



Press to go back to the original screen.

Step 3: Make the Port Settings for the Software RIP

Here you set the output destination port for the software RIP. For the output destination, use the setting for the IP address

made on the machine. For information about how to make the settings, refer to the documentation for the software RIP.

You can check whether the connection to the network has been made by using the printing-test feature in the software RIP

you're using. For information about how to carry out a printing test, refer to the documentation for the software RIP.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 49 50

Comments to this Manuals

No comments

Roland RA-640 Specifications Page 43

Comments to this Manuals

Related products and manuals for Print & Scan Roland RA-640