Roland SOLJET SC-500 User Manual download pdf (Page 7)

Outputting Contour Cut Jobs in Flexi

There are two stages to outputting jobs in Flexi. First, the job is

sent to Production Manager using the RIP and Print dialog.

The job is then sent to the output device from Production

manager.

Sending Contour Cut Jobs to Production

Manager

To begin the output process, select the objects you want to

output and open the RIP and Print dialog in one of the

following ways:

• From the File menu, select RIP and Print.

• Click on the RIP and Print button in the toolbar.

If no objects are selected, all objects in the design will be

output.

Selecting the Printer

Select the printer you want to use from the list in the top left

corner of the dialog.

Selecting the Cutter for Hybrid Output

If you are printing the job to a hybrid device, the hybrid device

will automatically be selected as the cutting device as well.

Selecting the Cutter for Virtual Hybrid Output

To select the cutter this will be used to cut the contours in a

virtual hybrid job:

1. Select the Advanced tab of the RIP and Print dialog.

2. Click on the Contour button.

3. Select the cutter from the list in the upper left corner of the

dialog.

4. Set Registration mark to the desired registration mark.

5. Click Done.

Sending the Job to Production Manager

Click the Send button to send the job to Production Manager.

1 2 3 4 5 6 7 8 9 10 11 12 ... 24 25

No comments

Roland SOLJET SC-500 User Manual Page 7