Roland VS-640i Setup Guide download pdf (Page 24)

3. Assembling and Installing

Step 1: Assemble the Stand – Mount the Machine

WARNING

Perform this task with all power switches left switched off.

Otherwise sudden movement of the machine may cause injury.

CAUTION

Unpacking and installation must be carried out by six or more personnel

(by four or more personnel for the 30-inch model).

Otherwise the machine or the stand may fall, resulting in injury.

Procedure



Attach the stand legs to the stand stay.

Place the stand legs with its horseshoe-shaped bracket facing inside, and secure them by tightening the

bolts in the order given below. (8 locations in total) Loose bolts may cause the stand to wobble.

Lightly tighten the bolts in the upper 2 locations. (4 locations in total for right and left)

Lightly tighten the bolts in the 2 locations on the side. (4 locations in total for right

and left)

Fully tighten the bolts in the upper 2 locations. (4 locations in total for right and left)

Fully tighten the bolts in the 2 locations on the side. (4 locations in total for right

and left)

Place the leg with the horseshoe-

shaped bracket facing inward.

Place the stand stay as shown in the gure below.

Stand leg

Stand stay

Stand leg

Stand stay

Side view Top view

Make this area

equally spaced.

Align them parallel

to each other

Hexagonal

wrench

Bolts

Hexagonal

wrench

Bolts

Stand stay

Stand leg

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 51 52

No comments

Roland VS-640i Setup Guide Page 24