Roland EDIROL FA-101 Owner's Manual download pdf (Page 9)

Front and rear panel

fig.front

fig.jack-type

1. Combo input jacks

These are analog audio input jacks with mic preamps. They accommodate either XLR

or phone plugs, allowing you to connect a variety of equipment. Either balanced or

unbalanced signals may be connected.

Phantom power (48 V) is provided for XLR type connections, allowing you to connect

condenser mics that require phantom power. In this case, turn on the

phantom

power switch (19)

located on the rear panel.

fig.XLR-TRS

* This instrument is equipped with balanced (XLR/

TRS) type input jacks. Wiring diagrams for these

jacks are shown on the right. Make connections

after first checking the wiring diagrams of other

equipment you intend to connect.

2. Input sensitivity knobs

These adjust the input level of the signals input to the front panel

combo input jacks (1)

3. Input impedance select switch

This switch selects either high impedance (Hi-Z) or low impedance (Lo-Z) as the type of device connected to

the

INPUT 2

phone jack of the

combo input jacks (1)

. If you have connected a guitar or bass to this jack,

select the high impedance (Hi-Z) setting; if you have connected a mic, select the low impedance (Lo-Z) setting.

Combo input jack INPUT 1

is fixed at low impedance (Lo-Z).

Front panel

78 9

10 11

XLR plug

TRS phone

plug

(balanced)

Phone plug

(unbalanced)

1:GND

2:HOT

3:COLD

GND(SLEEVE)

HOT(TIP)

COLD(RING)

FA-101_e.book 9 ページ２００４年４月５日　月曜日　午後３時５２分

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 47 48

Comments to this Manuals

No comments

Roland EDIROL FA-101 Owner's Manual Page 9

Comments to this Manuals

Related products and manuals for Recording Equipment Roland EDIROL FA-101