Roland TD-30 Owner's Manual download pdf (Page 77)

Eects

RING MODULATOR

This is an eect that applies amplitude modulation (AM)

to the input signal, producing bell-like sounds. You can

also change the modulation frequency in response to

changes in the volume of the sound sent into the eect.

Parameter Value Explanation

Mode

RING MOD,

ENV OSC

RING MOD: Applies

amplitude modulation to

the input signal

ENV OSC: Outputs

oscillation corresponding

to the input signal

Frequency 0–127

Adjusts the frequency

at which modulation is

applied.

Sensitivity 0–127

Adjusts the amount of

frequency modulation

applied.

Polarity UP, DOWN

Determines whether the

frequency modulation

moves towards higher

frequencies (UP) or lower

frequencies (DOWN).

STEP RINGMOD

This is a ring modulator that uses a 8-step sequence to

vary the frequency at which modulation is applied.

Parameter Value Explanation

Mode

RING MOD,

ENV OSC

RING MOD: Applies

amplitude modulation to

the input signal

ENV OSC: Outputs

oscillation corresponding

to the input signal

Freq Modify -64–63

Increases/decreases value

for all steps

Freq Step 1–8 0–127

Frequency of ring modula-

tion at each step

Attack 0–127

Speed at which the

modulation frequency

changes between steps

Rate 0–127

Rate at which 8-step

sequence is to be

repeated

PITCH SHIFT

Shifts the pitch of the original sound. This pitch shift can

add two pitch shifted sounds to the original sound.

Parameter Value Explanation

Pitch1 (semi) -24–+12 semi

Adjusts the pitch of Pitch

Shift 1 in semitone steps.

Pitch2 (semi) -24–+12 semi

Adjusts the pitch of Pitch

Shift 2 in semitone steps.

DlyTime 0–1300 msec

Adjusts the delay time

from the direct sound

until the Pitch Shift sound

is heard.

Feedback -98–+98 %

Adjusts the proportion of

the pitch shifted sound

that is fed back into the

eect.

Negative (-) settings will

invert the phase.

Pitch1 Level 0–127

Volume of the Pitch Shift

1 sound

Pitch2 Level 0–127

Volume of the Pitch Shift

2 sound

Wet Gain Low -15–+15 dB

Amount of boost/cut for

the eect sound’s lower

range

Wet Gain High -15–+15 dB

Amount of boost/cut for

the eect sound’s upper

range

AUTO PAN

Cyclically modulates the stereo location of the sound.

Parameter Value Explanation

Rate 0–127 Frequency of the change

Depth 0–127

Depth to which the eect

is applied

AppendicesExpansionSettingsPerformanceSetupOverview

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 159 160

Comments to this Manuals

No comments

Roland TD-30 Owner's Manual Page 77

Comments to this Manuals

Related products and manuals for Sequencer Roland TD-30