Roland V-Piano Owner's Manual download pdf (Page 26)

Getting ready

Use screws (4 x 16 mm) to attach the CD drive to the holes located on the V-Piano’s bottom panel, as shown in the

illustration.

* You must use only the screws (4 x 16 mm) that were included with the CD-01A.

fig.CDDmount.eps

Use a USB cable to connect the CD drive’s USB connector to the V-Piano’s front panel USB memory connector.

The USB cable included with the V-Piano can be routed past the V-Piano’s back panel and connected.

fig.CDD-USB.eps

Connect the AC adaptor included with the CD drive to the CD drive’s DC IN connector.

fig.CDD-PSB.eps

Secure the AC adaptor cord to the cord hook as shown in the illustration. This will prevent accidental disconnection of the

cord and loss of power or excessive strain on the AC adaptor jack if the cord is pulled inadvertently.

Connect the AC adaptor to an AC outlet.

Screws (4 x 16 mm)

USB Cable

To USB memory

connector

To AC outlet

Power cord

Cord hook

AC adaptor

Place the AC adaptor so the side with the indicator faces upwards and

the side with textual information faces downwards.

The indicator will light when you plug the AC adaptor into an AC outlet.

V-Piano_e.book 26 ページ２００９年１月２８日　水曜日　午前９時１０分

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 115 116

No comments

Roland V-Piano Owner's Manual Page 26