Roland FR-3sb User Manual download pdf (Page 15)

Attaching the straps

V-Accordion

(2) Connect the small plug of the adapter cable to the

DC IN socket and wind the cable around the guide:

You can also connect the MIDI cable to the MIDI OUT/

IN socket and wind it around the guide like the

adapter cable.

(3) Reinstall the padding, taking care to secure the

adapter cable and/or MIDI cable you have just

installed.

When finished, the FR-3 should look as follows:

(4) Reverse these steps to remove and disconnect the

adapter when you want to stop playing.

Attaching the straps

Proceed as follows to attach the straps to your FR-3:

(1) Unpack the straps.

(2) Put the FR-3 on a stable surface.

The connection panel must face down.

(3) Slide the upper end of one strap through the

holder ring (see the illustration).

The upper end is the part with the velcro portions

and the clip.

(4) Fasten the strap’s upper part to the velcro layer

below it.

(5) Close the security clip to ensure that the strap can-

not come loose.

(6) Repeat steps (3)~(5) for the other strap.

The upper strap ends should look as follows:

(7) Turn the FR-3 around (with the connection panel

on the left side, see below).

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 65 66

No comments

Roland FR-3sb User Manual Page 15