Roland VK-7 Owner's Manual download pdf (Page 41)

Playing the Organ

[PRESET] button’s indicator is lit

If you want to stop editing, press the HARMONIC BAR PART [UPPER] button.

Press the [WRITE] button to finalize the function assigned to the control

pedal.

The function assigned to the control pedal will be saved.

While the setting are being saved, the [1]–[8] buttons will blink.

[4]

OTHER TONES GLIDE

Controls the Glide function for the Oth-

er Tones. The pitch of the Other Tones

will change while the pedal is pressed,

and will gradually return to the original

pitch when the pedal is released.

[5]

PRESET UP

Steps sequentially through the presets.

Each time the pedal is pressed, the next

registration will be selected.

[6]

OVERDRIVE

The depth of overdrive will be con-

trolled. This is especially effective when

assigned to the expression pedal.

[7]

OTHER TONES

EXPRESSION

Select this when you want to use the ex-

pression pedal to control the volume of

the Other Tones.

While this function is being used, the ex-

pression pedal connected to the EX-

PRESSION PEDAL jack will affect only

the volume of the organ.

[8]

D BEAM SYNC

The same function that is assigned to the

D BEAM controller will also be assigned

to the control pedal. When you change

the function that is assigned to the D

BEAM controller, the function that is as-

signed to the control pedal will also

change.

Button

Parameter Page

[1]

CRESCENDO

As you depress the pedal connected to

the EXPRESSION PEDAL jack, the vol-

ume of all harmonic bars will gradually

become louder. When the pedal is fully

depressed, the volume will be as speci-

fied by the harmonic bars, and the rota-

ry will be in the FAST state. As you

return the pedal toward yourself, the

volume will decrease, and when the ex-

pression pedal is returned all the way

toward yourself, there will be no sound.

[2]

RING MODULATOR

When you depress the pedal, the ring

modulator (p. 35) will be applied. The

depth to which you depress the pedal

will control the depth of the ring modu-

lator.

[3]

TONE WHEEL BRAKE

The wheel brake will be applied (p. 35).

[4]

SPRING SHOCK

This lets you produce the sound of a

spring reverb unit being jarred (p. 35).

Button

Parameter Page

NOTE

When the “SPRING SHOCK”

function is assigned to the D

Beam controller or the control

pedal, please be aware that

raising the reverb level

excessively will produce a

high-volume impact sound. If

you want to reduce the volume

of the impact sound, use the

[REVERB] knob to adjust the

reverb level (p. 37).

If you press the VIBRATO

AND CHORUS [ON] button,

the setting will return to its

initial value.

NOTE

Never turn off the power while

the setting are being saved.

VK-8_e.book 41 ページ２００５年７月２５日　月曜日　午後４時２４分

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 83 84

Comments to this Manuals

No comments

Roland VK-7 Owner's Manual Page 41

Comments to this Manuals

Related products and manuals for Mixers Roland VK-7