Roland KR-17 User Manual Page 125

  • Download
  • Add to my manuals
  • Print
  • Page
    / 212
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 124
125
Chapter 6 User Program Registration
Chapter 6
Deleting Saved User
Program Sets
You can delete individual User Program sets saved to floppy
disks or in user memory.
When deleting a set of User Programs on a floppy disk, first
insert the floppy disk in the disk drive.
For more on the use of the disk drive, refer to “Using Floppy
Disks” (p. 114).
1.
Press the [User Program] button.
2.
Touch <File>.
3.
Touch <Delete>.
A “Delete User Program screen” like the following
appears.
fig.d-upgdel.eps_50
4.
Touch <Disk> or <User>.
Touch <Disk> if you are deleting User Programs from a
floppy disk; touch <User> if you are deleting User
Programs from the user memory.
5.
Touch
to select the set of User Programs
to be deleted.
6.
Touch <Delete>.
A screen like the one shown below appears.
fig.msg_filedel
7.
Touch <OK>.
The selected User Programs are deleted.
Touching <Cancel> cancels deleting the file.
* Never turn off the power or eject the floppy disk from
the disk drive while the operation is in progress.
Doing so will damage the KR’s internal memory,
making it unusable.
Copying Sets of User Programs on
Floppy Disks to the User Memory
You can copy sets of User Programs saved on floppy disks
and to user memory.
You can also copy sets of User Programs saved in user
memory and to floppy disks.
1.
Insert the floppy disk with the settings to be copied in
the disk drive.
2.
Touch the [User Program] button.
3.
Touch <File>.
4.
Touch <Copy>.
A “Copy User Programs screen” like the following
appears.
fig.d-upgcopy.eps_50
Specifying the copy source
5.
Touch <Disk>
to select the set of User
Programs you want to copy.
When “All” is selected, all of the sets of User Programs
on the floppy disk are copied to user memory.
Specifying the copy destination
6.
Touch <User>
to select the copy
destination for the set of User Programs.
If a User Program name is displayed, already a User
Program saved to that number is already.
If you select a number with User Programs data, and
then copy data to that number, the previously saved
User Programs are deleted. If you do not want to delete
the saved User Programs, select a number in the save-
destination column for which no name is displayed.
7.
Touch <Execute>.
The set of User Programs on the floppy disk is saved to
user memory.
* Never turn off the power or eject the floppy disk from
the disk drive while the operation is in progress.
Doing so will damage the KR’s internal memory,
making it unusable.
KR-17_15_e.book 125 ページ 2004年12月6日 月曜日 午後1時54分
Page view 124
1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 211 212

Comments to this Manuals

No comments