Roland KR-17 User Manual Page 23

  • Download
  • Add to my manuals
  • Print
  • Page
    / 212
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 22
23
Before You Start Playing
Before You
Start Playing
Connecting an External
Display
You can connect a computer monitor or other such external
display to the instrument, and display scores and lyrics on
the larger screen, and display whatever images as you like.
For more about the external display settings, refer to
“Changing the Settings for Showing Images with the
External Display (External Display)” (p. 163). For more on
displaying images, refer to “Selecting Images To Be Shown
on the KR and External Displays (User Image Display)” (p.
163)
If your instrument came with a CD drive, you can use the remote
control to switch screens.
Displays That Can Be Connected to This Instrument
In general, a great many of the VGA monitors and multiscan
monitors that are available on the market are compatible
with this instrument. However, before you connect any
monitor, make sure it meets the following specifications:
Resolution 640 x 480 pixels
Horizontal scan frequency 31.5 kHz
Vertical scan frequency 60 Hz
Connector 3-row, 15-pin D-Sub type
Signal Analog
NOTE
Confirm that the display to be used is compatible with the
frequencies mentioned above. Using a display that is not compatible
with the above frequencies may result in incorrect image output
when images move, and in certain cases may even damage the
display.
Making the Connections
NOTE
To prevent malfunction and/or damage to speakers or other devices,
always turn down the volume, and turn off the power on all devices
before making any connections.
1.
Turn off the power to the KR and the display to be
connected.
2.
Use display cable (sold separately) to connect the
display to the Ext Display connector on the KR.
3.
Switch on the KR.
4.
Switch on the connected display.
For more on handling the external display, refer to your display’s
owner’s manual.
Turning the Power Off
After use, turn off the power using the following procedure.
1.
Turn the volume all the way down on the KR.
2.
Turn off the KR.
3.
Turn off the connected display.
External Display
KR Bottom
Ext Display Connector
D-sub 15 pin
(Mini)
D-sub 15 pin
(Mini)
Display Cable
(Sold separately)
KR-17_15_e.book 23 ページ 2004年12月6日 月曜日 午後1時54分
Page view 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 211 212

Comments to this Manuals

No comments